... e-shop s autodíly!

Díly chlazení motoru VOLKSWAGEN TRANSPORTER T4 valník/podvozek (70E, 70L, 70M, 7DE, 7DL, 7DM 2.5 Syncro 85kW

Autodíly a náhradní díly VOLKSWAGENAutodíly a náhradní díly VOLKSWAGEN TRANSPORTER T4 valník/podvozek (70E, 70L, 70M, 7DE, 7DL, 7DMChlazení, topení a klimatizace VOLKSWAGEN TRANSPORTER T4 valník/podvozek (70E, 70L, 70M, 7DE, 7DL, 7DMChladící systém motoru ochlazuje chladící kapalinu ohřátou spalovacím procesem v motoru a reguluje její teplotu. Odebrané teplo je odváděno mimo vůz. Kategorie chlazení obsahuje chladící jednotky, větráky, termostaty, relé, hadice, spínače a další.

Vyberte výrobce......

Vyberte výrobce...

seřadit abecedně|od nejlevnějších|od nejdražších

  • VAICO ‐ Hadice chladiče Q+, original equipment manufacturer quality VAC V10-7560

    zvětšitHadice chladiče VAICO ‐ VAC V10-7560
    239,-ve skladu
    Kód motoru: AETPro PR-číslo: AC0Kód motoru: APLPro PR-číslo: AC0Topení / chlazení: pro vozidla bez přídavného topeníKód motoru: AVTPro PR-číslo: AC0Topení / chlazení: pro vozidla bez přídavného topeníPřední/zpětný chod: pro chod vpředHadice chladicí soustavy: od spojovací části po přídavnou vodní pumpuEAN:040623753245214062375324521Použitá čísla: 1066503, VAV10-7560 - 074 121 073 AK
    VOLKSWAGEN074 121 073 AK (074121073AK)Konkurenční kódy 
    Všeobecné informace: In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
    Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.

  • VAICO ‐ Nemrznoucí kapalina do chladiče 1,5 l VAC V60-0019

    zvětšitNemrznoucí kapalina VAICO ‐ VAC V60-0019
    209,-v prodejně
    Barva: FialováVelikost balení: 1,5 lViskozitní třída SAE: VA-012+Doporučení výrobce oleje: WSS M97B44 D 6277M TL 774 F 325.3 TL 774 DKoncentrát Chemická vlastnost: bezaminový bezfosfátový s obsahem silikátu bez nitridu boratfreiDoporučený interval výměny [roky]: 2Dbát zadání výrobce vozidla Dbát na objem náplně systému Typ kontejneru: LáhevVýška [mm]: 260Délka [mm]: 70šířka [mm]: 125,0číslo výrobku doporučeného příslušenství: V99-1005Hmotnost [kg]: 1,799EAN:040460012824094046001282409Použitá čísla: AFNOR NF R15-601, AS 2108-2004, ASTM D 3306, ASTM D 4985, BS 6580:2010, CUNA NC 596-16, DEXCOOL, Ford WSS-M 97B44-D, Ford WSS-M97B44-D, Frostschutz, G12 Plus, G30, GM 1825M, GM 1899M, GM 6277 M / MAN 324 Typ SNF, GM 6277M, GM Saturn, Kühlerfrostschutz, Kühlmittel, MAN 324 SNF, MB 325.3, MB 325.3 / OE: 000 989 08 25 98, SAE J 1034, VA-012 Plus, VW G 012 A8G M1, VW G 012 A8F A1 / VW TL 774 F/D, VW TL 774 D, VW TL 774 F
    AUDIG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)G 013 A8J 1G (G013A8J1G)G01 2A8 FM1 (G012A8FM1)G013A8J1GG12G12+ (G12)FORD1 020 121 (1020121)1 047 034 (1047034)1 113 805 (1113805)1 222 110 (1222110)1 222 116 (1222116)1 336 797 (1336797)1 931 955 (1931955)1 931 964 (1931964)1 931 966 (1931966)2 107 116 (2107116)2 361 569 (2361569)2 361 571 (2361571)2U2J 19544 AA2A (2U2J19544AA2A)2U2J 19544 BA1A (2U2J19544BA1A)2U2J 19544 EA2C (2U2J19544EA2C)2U2J19544BA1A4U7J 19544 AA2A (4U7J19544AA2A)4U7J19544AA2A5 009 920 (5009920)5 022 306 (5022306)5 023 819 (5023819)5 023 830 (5023830)ESEM 978B4 HA (ESEM978B4HA)FU7J 19544 AD (FU7J19544AD)FU7J 19544 BD (FU7J19544BD)FU7J 19544 DA (FU7J19544DA)FU7J 19544 EA (FU7J19544EA)WSS-M97B44-D (WSSM97B44D)WSSM 97B4 4D (WSSM97B44D)MAN324 Typ SNF (324TypSNF)MERCEDES-BENZ000 989 16 25 (0009891625)325.3 (3253)A 000 989 16 25 (A0009891625)OPEL19 40 650 (1940650)19 40 663 (1940663)93 170 402 (93170402)SEATG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)G01 2A8 FM1 (G012A8FM1)G12G12+ (G12)ŠKODAG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)G 012 A8F M1 (G012A8FM1)G01 2A8 FM1 (G012A8FM1)G12G12+ (G12)VOLKSWAGENG 012 A8C A1 (G012A8CA1)G 012 A8C A8 (G012A8CA8)G 012 A8D A1 (G012A8DA1)G 012 A8D A8 (G012A8DA8)G 012 A8F A1 (G012A8FA1)G 012 A8F M1 (G012A8FM1)G 012 A8F M2 (G012A8FM2)G 012 A8F M8 (G012A8FM8)G 012 A8F M9 (G012A8FM9)G 013 A8J 1G (G013A8J1G)G013A8J1GG12G12+ (G12)N 052 774 F0 (N052774F0)TL 774 D (TL774D)TL 774 F (TL774F)TL 774 F/D (TL774FD)VAGG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)N 052 774 F0 (N052774F0)TL 774 F (TL774F)GENERAL MOTORS9194431931 704 02 (93170402)GM 1825M (GM1825M)GM 1899M (GM1899M)GM 6277M (GM6277M)FORD USA2U2J19544BA1A4U7J19544AA2AKonkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Nemrznoucí kapalina do chladiče 5 l VAC V60-0070

    zvětšitNemrznoucí kapalina VAICO ‐ VAC V60-0070
    659,-ve skladu
    Barva: FialováVelikost balení: 5 lViskozitní třída SAE: VA-012+Doporučení výrobce oleje: TL 774 F 325.3 6277M WSS M97B44 D TL 774 DKoncentrát Chemická vlastnost: bezfosfátový bez nitridu boratfrei s obsahem silikátu bezaminovýDoporučený interval výměny [roky]: 2Dbát zadání výrobce vozidla Dbát na objem náplně systému Typ kontejneru: Kanystrčíslo výrobku doporučeného příslušenství: V99-1005šířka [mm]: 115,0Délka [mm]: 300Výška [mm]: 230Hmotnost [kg]: 5,862EAN:040460013341914046001334191Použitá čísla: AFNOR NF R15-601, AS 2108-2004, ASTM D 3306, ASTM D 4985, ASTM D3306, ASTM D4340, AUDI-VW G012 A8D A1, AUDI-VW G012 A8F A1, AUDI-VW N 052 774 F0, AUDI-VW TL 774 F, BS 6580:2010, CUNA NC 596-16, DEXCOOL, Ford ESE-M-978B4H-A, Ford WSS-M 97B44-D, Ford WSS-M97B44-D, Frostschutz, G12 Plus, G30, GM 1825M, GM 1825M, 1899M, 6277M, GM 1899M, GM 6277 M / MAN 324 Typ SNF, GM 6277M, GM Saturn, Kühlerfrostschutz, Kühlmittel, MAN 324 SNF, MAN 324 Typ SNF, MB 325.3, MB 325.3 / OE: 000 989 08 25 98, Mercedes Benz 325.3, NATO S-759, NF R 15 601, SAE J 1034, SAE J1034, VA-012 Plus, VW G 012 A8F A1 / VW TL 774 F/D, VW TL 774 D, VW TL 774 F
    AUDIG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)G 013 A8J 1G (G013A8J1G)G01 2A8 DA1 (G012A8DA1)G01 2A8 FA1 (G012A8FA1)G01 2A8 FM1 (G012A8FM1)G013A8J1GG12G12+ (G12)FORD1 020 121 (1020121)1 047 034 (1047034)1 113 805 (1113805)1 222 110 (1222110)1 222 116 (1222116)1 336 797 (1336797)1 931 955 (1931955)1 931 964 (1931964)1 931 966 (1931966)2 107 116 (2107116)2 361 569 (2361569)2 361 571 (2361571)2U2J 19544 AA2A (2U2J19544AA2A)2U2J 19544 BA1A (2U2J19544BA1A)2U2J 19544 EA2C (2U2J19544EA2C)2U2J19544BA1A4U7J 19544 AA2A (4U7J19544AA2A)4U7J19544AA2A5 009 920 (5009920)5 022 306 (5022306)5 023 819 (5023819)5 023 830 (5023830)ESEM 978B4 HA (ESEM978B4HA)FU7J 19544 AD (FU7J19544AD)FU7J 19544 BD (FU7J19544BD)FU7J 19544 DA (FU7J19544DA)FU7J 19544 EA (FU7J19544EA)WSS-M97B44-D (WSSM97B44D)WSSM 97B4 4D (WSSM97B44D)MAN324 Typ SNF (324TypSNF)MERCEDES-BENZ000 989 16 25 (0009891625)325.3 (3253)A 000 989 16 25 (A0009891625)OPEL19 40 650 (1940650)19 40 663 (1940663)93 170 402 (93170402)SEATG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)G01 2A8 FA1 (G012A8FA1)G01 2A8 FM1 (G012A8FM1)G12G12+ (G12)ŠKODAG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)G 012 A8F M1 (G012A8FM1)G01 2A8 FA1 (G012A8FA1)G12G12+ (G12)VOLKSWAGENG 012 A8C A1 (G012A8CA1)G 012 A8C A8 (G012A8CA8)G 012 A8D A1 (G012A8DA1)G 012 A8D A8 (G012A8DA8)G 012 A8F A1 (G012A8FA1)G 012 A8F M1 (G012A8FM1)G 012 A8F M2 (G012A8FM2)G 012 A8F M8 (G012A8FM8)G 012 A8F M9 (G012A8FM9)G 013 A8J 1G (G013A8J1G)G01 2A8 DA1 (G012A8DA1)G01 2A8 FA1 (G012A8FA1)G013A8J1GG12G12+ (G12)N 052 774 F0 (N052774F0)TL 774 D (TL774D)TL 774 F (TL774F)VAGG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)TL 774 F (TL774F)GENERAL MOTORS9194431931 704 02 (93170402)GM 1825M (GM1825M)GM 1899M (GM1899M)GM 6277M (GM6277M)FORD USA2U2J19544BA1A4U7J19544AA2AKonkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Nemrznoucí kapalina do chladiče Green Mobility Parts 1,5 l VAC V60-0096

    zvětšitNemrznoucí kapalina VAICO ‐ VAC V60-0096
    160,-ve skladu
    Barva: FialováVelikost balení: 1,5 lViskozitní třída SAE: VA-012 Plus -20°CVA-012+ mix -20°CDoporučení výrobce oleje: TL 774 D 6277M 325.3 WSS M97B44 D TL 774 FPřipravený k použití Chemická vlastnost: bez nitridu bezaminový bezfosfátovýObsah [litr]: 1,5Doporučený interval výměny [roky]: 2Dbát zadání výrobce vozidla Dbát na objem náplně systému Typ kontejneru: LáhevDélka [mm]: 70Výška [mm]: 260šířka [mm]: 125,0číslo výrobku doporučeného příslušenství: V99-1005Rozsah teplot [°C]: -20Hmotnost [kg]: 1,692EAN:040460013732204046001373220Použitá čísla: AFNOR NF R15-601, AS 2108-2004, ASTM D 3306, ASTM D 4985, BS 6580:2010, CUNA NC 596-16, DEXCOOL, Ford WSS-M97B44-D, Frostschutz, G12 Plus, G30, GM 1825M, GM 1899M, GM 6277M, GM Saturn, Kühlerfrostschutz, Kühlmittel, MAN 324 SNF, MB 325.3, Readymix, SAE J 1034, VW TL 774 D, VW TL 774 F
    AUDIG 013 A8J 1G (G013A8J1G)G013A8J1GG12G12+ (G12)FORD2 107 116 (2107116)2U2J 19544 EA2C (2U2J19544EA2C)ESEM 978B4 HA (ESEM978B4HA)WSS M97B4 4D (WSSM97B44D)WSS-M97B44-D2 (WSSM97B44D2)MAN324 Typ SNF (324TypSNF)MERCEDES-BENZ325.3 (3253)OPEL19 40 650 (1940650)19 40 663 (1940663)93 170 402 (93170402)SEATG 012 A8D A1 (G012A8DA1)G01 2A8 FA1 (G012A8FA1)G12G12+ (G12)ŠKODAG 012 A8D A1 (G012A8DA1)G01 2A8 FA1 (G012A8FA1)G12G12+ (G12)VOLKSWAGENG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)G 013 A8J 1G (G013A8J1G)G013A8J1GG12G12+ (G12)TL 774 F (TL774F)VA-012 Plus Spezial (VA012PlusSpezial)VAGG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)TL 774 F (TL774F)VA-012 Plus Spezial (VA012PlusSpezial)GENERAL MOTORS9194431931 704 02 (93170402)GM 1825M (GM1825M)GM 1899M (GM1899M)GM 6277M (GM6277M)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Příruba chladiva VAC V10-9709

    zvětšitPříruba chladiva VAICO ‐ VAC V10-9709
    249,-ve skladu
    Hloubka (mm): 103šířka [mm]: 75,0Výška [mm]: 45Hmotnost [kg]: 0,067EAN:040460014407004046001440700AUDI074 121 121 (074121121)074 121 121 B (074121121B)SEAT074 121 121 (074121121)074 121 121 B (074121121B)7412112174121121BŠKODA074 121 121 (074121121)074 121 121 B (074121121B)7412112174121121BVOLKSWAGEN034121121E074 121 121 (074121121)074 121 121 B (074121121B)VAG074 121 121 (074121121)074 121 121 B (074121121B)74 121 121 (74121121)74 121 121 B (74121121B)FARESIN4541Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Příruba chladiva VAC V10-0273

    zvětšitPříruba chladiva VAICO ‐ VAC V10-0273
    57,-ve skladu
    Montovaná strana: nahořeDoplňkový vyrobek / doplňkové info: s těsněnímHmotnost [kg]: 0,05EAN:040460012601174046001260117AUDI026121144E074 121 132 (074121132)SEAT074 121 132 (074121132)7412113274121133BŠKODA074 121 132 (074121132)7412113274121133BVOLKSWAGEN026121144E074 121 132 (074121132)7412113274121133BVAG074 121 132 (074121132)74 121 132 (74121132)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Těsnicí kroužek šroubu chladiče VAC V10-2598

    zvětšitTěsnicí kroužek šroubu chladiče VAICO ‐ VAC V10-2598
    17,-ve skladu
    Tloušťka / síla [mm]: 3,8Vnější průměr [mm]: 28,5Materiál: GumaHmotnost [kg]: 0,0062EAN:040460015873684046001587368AUDI1H0 121 687 (1H0121687)1H0 121 687 A (1H0121687A)SEAT1H0 121 687 (1H0121687)1H0 121 687 A (1H0121687A)ŠKODA1H0 121 687 (1H0121687)1H0 121 687 A (1H0121687A)VOLKSWAGEN1H0 121 687 (1H0121687)1H0 121 687 A (1H0121687A)VAG1H0 121 687 (1H0121687)1H0 121 687 A (1H0121687A)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Uzavírací víčko VAC V10-0012

    zvětšitUzavírací víčko, nádoba chladiva VAICO ‐ VAC V10-0012
    100,-ve skladu
    Průměr [mm]: 78Výška [mm]: 35,5Tlak [bar]: 1,2Hmotnost [kg]: 0,1026EAN:040460011383864046001138386AUDI1H0 121 321 A (1H0121321A)1H0 121 321 B (1H0121321B)1H0 121 321 C (1H0121321C)357 121 321 (357121321)357 121 321 A (357121321A)357 121 321 C (357121321C)SEAT1H0 121 321 A (1H0121321A)1H0 121 321 B (1H0121321B)1H0 121 321 C (1H0121321C)357 121 321 (357121321)357 121 321 A (357121321A)357 121 321 C (357121321C)ŠKODA1H0 121 321 A (1H0121321A)1H0 121 321 B (1H0121321B)1H0 121 321 C (1H0121321C)357 121 321 A (357121321A)357 121 321 C (357121321C)VOLKSWAGEN191 809 101 A (191809101A)191 809 101 F (191809101F)1GM 809 101 A (1GM809101A)1H0 121 321 A (1H0121321A)1H0 121 321 B (1H0121321B)1H0 121 321 C (1H0121321C)357 121 321 (357121321)357 121 321 A (357121321A)357 121 321 C (357121321C)VAG1H0 121 321 A (1H0121321A)1H0 121 321 B (1H0121321B)1H0 121 321 C (1H0121321C)357 121 321 (357121321)357 121 321 A (357121321A)357 121 321 C (357121321C)MINI1H0121321CKonkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Uzavírací zátka příruby chladiva VAC V10-0492

    zvětšitUzavírací zátka příruby chladiva VAICO ‐ VAC V10-0492
    19,-ve skladu
    Doplňkový vyrobek / doplňkové info: s pružinou s těsněnímHmotnost [kg]: 0,0627EAN:040460013568104046001356810AUDI357 121 140 (357121140)357 121 140 S (357121140S)SEAT357 121 140 (357121140)357 121 140 S (357121140S)ŠKODA357 121 140 (357121140)357 121 140 S (357121140S)VOLKSWAGEN357 121 140 (357121140)357 121 140 S (357121140S)VAG357 121 140 (357121140)357 121 140 S (357121140S)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Vedení chladicí kapaliny VAC V10-4935

    zvětšitVedení chladicí kapaliny VAICO ‐ VAC V10-4935
    1 149,-ve skladu
    Hmotnost [kg]: 0,525EAN:040460018698464046001869846AUDI074 121 065 AE (074121065AE)SEAT074 121 065 AE (074121065AE)741 210 65A E (74121065AE)ŠKODA074 121 065 AE (074121065AE)741 210 65A E (74121065AE)VOLKSWAGEN074 121 065 AE (074121065AE)VAG074 121 065 AE (074121065AE)74 121 065 AE (74121065AE)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
sbalit vše nahoru
Vše o nákupu
Zákaznický účet
Technický rádce
O společnosti

Logo Heuréka

Tento e-shop měl za posledních 90 dní tisíce spokojených zákazníků.


Logo Zboží.cz

Zde prezentovaná data, zejména celá databáze, nesmějí být kopírována. Je zakázáno data nebo celou databázi bez předchozího písemného svolení od společnosti TecAlliance kopírovat a distribuovat a/nebo toto jednání umožnit třetím osobám. Porušení zakládá neoprávněný zásah do autorského práva a bude stíháno.

Copyright © 2002 - 2025 Autokšeft, s.r.o.
 

Tento web využívá k některým funkcím, jako je přihlašování, analýza návštěvnosti nebo personalizece reklam, soubory cookie. Také dovolujeme našim důvěryhodným partnerům analyzovat využívání našich stránek.