... e-shop s autodíly!

Filtry VOLKSWAGEN PASSAT ALLTRACK B8 Variant (3G5, CB5) 2.0 TDI 4motion 176kW

Autodíly a náhradní díly VOLKSWAGENMotor a převodovka VOLKSWAGEN PASSAT ALLTRACK B8 Variant (3G5, CB5)Všechny filtry ve voze, ať už se jedná o filtr vzduchový, palivový, olejový, kabinový, hydraulický nebo filtr chladiva, je nutné pravidelně měnit. Pouze pravidelnou údržbou zajistíte delší životnost celého systému.

Vyberte výrobce......

Vyberte výrobce...

  • VAICO ‐ Hydraulický filtr automatické převodovky VAC V10-2287

    zvětšitHydraulický filtr automatické převodovky VAICO ‐ VAC V10-2287
    739,-ve skladu
    Převodovka typ: DQ380 DQ400E DQ500Typ převodovky: Dvouspojková převodovka 7-stupňová automatická převodovkaVýška [mm]: 138Vnější průměr [mm]: 58Vybavení vozidla: Pro vozidla s přímým řazenímDoplňkový výrobek / doplňkové info 2: s těsnicím kroužkemDoplňkový potřebný díl - viz. seznam příslušenství Typ filtru: Vložka filtruDoporučený interval výměny [km]: 60000Doporučený interval výměny [roky]: 5Hmotnost [kg]: 0,121EAN:0404600155635740460015563574062375556359Použitá čísla0BH 325 183 A, 0BH 325 183 B, 0BH 325 183 D
    VOLKSWAGEN0BH 325 183 B kit1 (0BH325183Bkit1)VAG0BH 325 183 A (0BH325183A)0BH 325 183 A kit (0BH325183Akit)0BH 325 183 B (0BH325183B)0BH 325 183 B kit (0BH325183Bkit)0BH 325 183 B kit1 (0BH325183Bkit1)0BH 325 183 D kit (0BH325183Dkit)BH 325 183 A kit (BH325183Akit)BH 325 183 B kit (BH325183Bkit)BH 325 183 D kit (BH325183Dkit)Konkurenční kódy 
    Všeobecné informaceProducts supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
  • VAICO ‐ Hydraulický filtr automatické převodovky VAC V10-2287-1

    zvětšitHydraulický filtr automatické převodovky VAICO ‐ VAC V10-2287-1
    729,-ve skladu
    Převodovka typ: DQ380 DQ400E DQ500Typ převodovky: Dvouspojková převodovka 7-stupňová automatická převodovkaVýška [mm]: 138Vnější průměr [mm]: 58Vybavení vozidla: Pro vozidla s přímým řazenímDoplňkový výrobek / doplňkové info 2: s těsnicím kroužkemDoplňkový potřebný díl - viz. seznam příslušenství Typ filtru: Vložka filtruDoporučený interval výměny [km]: 60000Doporučený interval výměny [roky]: 5Hmotnost [kg]: 0,136EAN:040460019939544046001993954Použitá čísla0BH 325 183 A, 0BH 325 183 B, 0BH 325 183 D
    SEATN 910 845 01 (N91084501)N91084501VOLKSWAGEN0BH 325 183 B kit1 (0BH325183Bkit1)VAG0BH 325 183 A kit (0BH325183Akit)0BH 325 183 B kit (0BH325183Bkit)0BH 325 183 B kit1 (0BH325183Bkit1)0BH 325 183 D kit (0BH325183Dkit)0BH325183BBH 325 183 A kit (BH325183Akit)BH 325 183 B kit (BH325183Bkit)BH 325 183 D kit (BH325183Dkit)BUICK0BH325183ACUPRA0BH325183BKonkurenční kódy 
    Všeobecné informaceProducts supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
  • VAICO ‐ Hydraulický filtr automatické převodovky VAC V10-0440

    zvětšitHydraulický filtr automatické převodovky VAICO ‐ VAC V10-0440
    419,-ve skladu
    Převodovka typ: 02E 0D9 DQ250Doplňkový výrobek / doplňkové info 2: s těsnicím kroužkemDoplňkový potřebný díl - viz. seznam příslušenství Typ převodovky: 6-rychlostní automatická převodovkaVýška [mm]: 106Vnější průměr [mm]: 58Typ filtru: Vložka filtruTyp převodovky: Dvouspojková převodovkaVybavení vozidla: Pro vozidla s přímým řazenímDoporučený interval výměny [km]: 60000Doporučený interval výměny [roky]: 5Hmotnost [kg]: 0,1EAN:040460013906924046001390692AUDI02E 305 051 B (02E305051B)02E 305 051 C (02E305051C)02E 398 051 (02E398051)02E305051D2E 305 051 B (2E305051B)2E 305 051 C (2E305051C)2E 398 051 (2E398051)SEAT02E 305 051 B (02E305051B)02E 305 051 C (02E305051C)02E 398 051 (02E398051)2E 305 051 B (2E305051B)2E 305 051 C (2E305051C)2E 398 051 (2E398051)ŠKODA02E 305 051 B (02E305051B)02E 305 051 C (02E305051C)02E 398 051 (02E398051)02E3050512E 305 051 B (2E305051B)2E 305 051 C (2E305051C)2E 398 051 (2E398051)VOLKSWAGEN02E 305 051 B (02E305051B)02E 305 051 C (02E305051C)02E 305 051 C kit (02E305051Ckit)02E 398 051 (02E398051)2E 305 051 B (2E305051B)2E 305 051 C (2E305051C)2E 398 051 (2E398051)VAG02E 305 051 B (02E305051B)02E 305 051 C (02E305051C)02E 305 051 C kit (02E305051Ckit)02E 305 051 D (02E305051D)02E 398 051 (02E398051)02E3050512E 305 051 B (2E305051B)2E 305 051 C (2E305051C)2E 305 051 C kit (2E305051Ckit)2E 398 051 (2E398051)FORD USA02E305051BAJAJ REat30034Konkurenční kódy 
    Všeobecné informaceProducts supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
  • VAICO ‐ Hydraulický filtr automatické převodovky VAC V10-4722-1

    zvětšitHydraulický filtr automatické převodovky VAICO ‐ VAC V10-4722-1
    1 229,-ve skladu
    Doplňkový potřebný díl - viz. seznam příslušenství Převodovka typ: 0GCTyp převodovky: 7-stupňová automatická převodovka Dvouspojková převodovkaPřevodovka typ: DQ381Vybavení vozidla: Pro vozidla s přímým řazenímDoplňkový výrobek / doplňkové info 2: s těsnicím kroužkemTyp filtru: Vložka filtruDoporučený interval výměny [km]: 60000Doporučený interval výměny [roky]: 5Hmotnost [kg]: 0,129EAN:040460019939304046001993930Použitá čísla0GC 325 183, GC 325 183
    AUDI0GC 3525 183 A (0GC3525183A)0GC325183FORD2 648 643 (2648643)2 766 512 (2766512)VWN3CA6E286AAVWN3CA6E286BASEATGC325183GC325183AŠKODA0GC325183VOLKSWAGEN0GC 325 183 A kit (0GC325183Akit)0GC 325 183 D (0GC325183D)0GC3251830GC325183AGC 325 183 D (GC325183D)GC325183AN 910 845 01 (N91084501)N91084501VAG0GC 325 183 (0GC325183)0GC 325 183 A (0GC325183A)0GC 325 183 A kit (0GC325183Akit)0GC 325 183 kit (0GC325183kit)GC 325 183 kit (GC325183kit)CUPRAGC325183AKonkurenční kódy 
    Všeobecné informaceProducts supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
  • VAICO ‐ Hydraulický filtr automatické převodovky Q+, original equipment manufacturer quality VAC V10-0440-1

    zvětšitHydraulický filtr automatické převodovky VAICO ‐ VAC V10-0440-1
    449,-ve skladu
    Převodovka typ: 02E 0D9Vnější průměr [mm]: 58Typ převodovky: 6-rychlostní automatická převodovkaVýška [mm]: 106Převodovka typ: DQ250Typ převodovky: Dvouspojková převodovkaVybavení vozidla: Pro vozidla s přímým řazenímDoplňkový výrobek / doplňkové info 2: s těsnicím kroužkemDoplňkový potřebný díl - viz. seznam příslušenství Typ filtru: Vložka filtruDoporučený interval výměny [km]: 60000Doporučený interval výměny [roky]: 5Hmotnost [kg]: 0,111EAN:0404600163675240460016367524046001985171AUDI02E 305 051 B (02E305051B)02E 305 051 C (02E305051C)02E 398 051 (02E398051)02E305051D2E 305 051 B (2E305051B)2E 305 051 C (2E305051C)2E 398 051 (2E398051)SEAT02E 305 051 B (02E305051B)02E 305 051 C (02E305051C)02E 398 051 (02E398051)02E305051D2E 305 051 B (2E305051B)2E 305 051 C (2E305051C)2E 398 051 (2E398051)ŠKODA02E 305 051 B (02E305051B)02E 305 051 C (02E305051C)02E 398 051 (02E398051)02E30505102E305051D2E 305 051 B (2E305051B)2E 305 051 C (2E305051C)2E 398 051 (2E398051)VOLKSWAGEN02E 305 051 B (02E305051B)02E 305 051 C (02E305051C)02E 305 051 C kit (02E305051Ckit)02E 398 051 (02E398051)02E305051D2E 305 051 B (2E305051B)2E 305 051 C (2E305051C)2E 305 051 D (2E305051D)2E 398 051 (2E398051)VAG02E 305 051 B (02E305051B)02E 305 051 C (02E305051C)02E 305 051 C kit (02E305051Ckit)02E 305 051 D (02E305051D)02E 398 051 (02E398051)02E3050512E 305 051 B (2E305051B)2E 305 051 C (2E305051C)2E 305 051 C kit (2E305051Ckit)2E 398 051 (2E398051)FORD USA02E305051BAJAJ REat30034Konkurenční kódy 
    Všeobecné informaceProducts supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
  • VAICO ‐ Hydraulický filtr haldex spojky VAC V10-6662

    zvětšitHydraulický filtr haldex spojky VAICO ‐ VAC V10-6662
    1 229,-ve skladu
    Montovaná strana: zadní nápravaDoplňkový vyrobek / doplňkové info: s příslušenstvímProvedení spojky: pro NasskupplungTyp filtru: Síťový filtrDoplňkový výrobek / doplňkové info 2: se šrouby s těsnicím kroužkemDoporučený interval výměny [km]: 30000Doporučený interval výměny [roky]: 3Spojka - ID: HALDEX GEN V / 5Vnitřní průměr těsnicího kroužku [mm]: 44EAN:040623752599154062375259915Použitá čísla0CQ 598 549
    AUDI0CQ 598 305 (0CQ598305)0CQ 598 305 kit (0CQ598305kit)N 105 540 05 (N10554005)PAF105540SEAT0CQ 598 305 (0CQ598305)0CQ 598 305 kit (0CQ598305kit)N 105 540 05 (N10554005)ŠKODA0CQ 598 305 (0CQ598305)0CQ 598 305 kit (0CQ598305kit)N 105 540 05 (N10554005)VOLVO31 325 413 (31325413)VOLKSWAGEN0CQ 598 305 (0CQ598305)0CQ 598 305 kit (0CQ598305kit)N 105 540 05 (N10554005)PAF105540VAG0CQ 598 305 (0CQ598305)0CQ 598 305 kit (0CQ598305kit)CUPRA0CQ 598 305 (0CQ598305)0CQ 598 305 kit (0CQ598305kit)N 105 540 05 (N10554005)PAF105540Konkurenční kódy 
    Všeobecné informaceIn the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
    Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
  • VAICO ‐ Kryt pouzdra olejového filtru Original VAICO Quality VAC V10-7423

    zvětšitKryt pouzdra olejového filtru VAICO ‐ VAC V10-7423
    599,-ve skladu
    Materiál: PlastEAN:040623753154134062375315413SEAT03N115433AŠKODA03N115433AVOLKSWAGEN03N115433AVAG03N 115 433 A (03N115433A)Konkurenční kódy 
    Všeobecné informaceIn the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
    Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
  • VAICO ‐ Olejový filtr Green Mobility Parts VAC V10-2825

    zvětšitOlejový filtr VAICO ‐ VAC V10-2825
    119,-ve skladu
    Vnější průměr [mm]: 65Vnitřní průměr 1 [mm]: 33,5Výška [mm]: 103Typ filtru: Vložka filtruVnitřní průměr 2 [mm]: 21Hmotnost [kg]: 0,533EAN:040460016031434046001603143AUDI03N 115 466 A (03N115466A)03N 115 562 (03N115562)03N 115 562 B (03N115562B)3N 115 466 A (3N115466A)3N11556265055046000MAN03N11556203N115562BOPEL3N115562BSEAT03N 115 466 A (03N115466A)03N 115 562 (03N115562)03N 115 562 B (03N115562B)3N 115 466 A (3N115466A)3N1155623N115562BŠKODA03N 115 466 A (03N115466A)03N 115 562 (03N115562)03N 115 562 B (03N115562B)3N 115 466 A (3N115466A)3N1155623N115562BVOLKSWAGEN03N 115 466 A (03N115466A)03N 115 562 (03N115562)03N 115 562 B (03N115562B)3N 115 466 A (3N115466A)3N1155623N115562BVAG03N 115 466 (03N115466)03N 115 562 (03N115562)03N 115 562 B (03N115562B)03N115562B3N 115 466 (3N115466)3N 115 562 (3N115562)CUPRA65055046002Konkurenční kódy 
    Všeobecné informaceProducts supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
  • VAICO ‐ Palivový filtr VAC V10-2668

    zvětšitPalivový filtr VAICO ‐ VAC V10-2668
    279,-ve skladu
    Výška [mm]: 151Vnitřní průměr [mm]: 9,2Vnější průměr [mm]: 93,5Pro PR-číslo: 0F5Typ filtru: Vložka filtruHmotnost [kg]: 0,2309EAN:040460015974354046001597435AUDI5Q0 127 177 (5Q0127177)5Q0 127 177 B (5Q0127177B)5Q0 127 177 D (5Q0127177D)5Q0 127 400 F (5Q0127400F)SEAT5Q0 127 177 (5Q0127177)5Q0 127 177 B (5Q0127177B)5Q0 127 177 D (5Q0127177D)5Q0 127 400 F (5Q0127400F)ŠKODA5Q0 127 177 (5Q0127177)5Q0 127 177 B (5Q0127177B)5Q0 127 177 D (5Q0127177D)5Q0 127 400 F (5Q0127400F)VOLKSWAGEN5Q0 127 177 (5Q0127177)5Q0 127 177 B (5Q0127177B)5Q0 127 177 D (5Q0127177D)5Q0 127 400 F (5Q0127400F)VAG5Q0 127 177 (5Q0127177)5Q0 127 177 B (5Q0127177B)5Q0 127 177 D (5Q0127177D)5Q0 127 400 F (5Q0127400F)Konkurenční kódy 
    Všeobecné informaceProducts supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
  • VAICO ‐ Sada dílů výměny oleje automatické převodovky VAC V10-4991-SP

    zvětšitSada dílů výměny oleje automatické převodovky VAICO ‐ VAC V10-4991-SP
    4 119,-ve skladu
    Jednotka množství: SadaPřevodovka typ: 0GCDoplňkový potřebný díl - viz. seznam příslušenství Doporučený interval výměny [roky]: 5Doporučený interval výměny [km]: 60000Obsah [litr]: 6Doplňkový výrobek / doplňkové info 2: bez filtru s množstvím oleje pro standardní výměnu olejePřevodovka typ: DQ381Doplňkový vyrobek / doplňkové info: s těsněnímDoplňkový výrobek / doplňkové info 2: s těsnicím kroužkemTyp převodovky: pro dvouspojkovou převodovku 7stVybavení vozidla: Pro vozidla s přímým řazenímEAN:040623751561394062375156139Použitá číslaG 055 529 A2
    FORD2 648 643 (2648643)2 766 512 (2766512)VWN3CA6E286AAVWN3CA6E286BAVOLKSWAGENG 055 529 A2 kit2 (G055529A2kit2)VAGG 055 529 A2 kit2 (G055529A2kit2)Konkurenční kódy 
    Všeobecné informaceProducts supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.


Logo Heuréka

Tento e-shop měl za posledních 90 dní tisíce spokojených zákazníků.


Logo Zboží.cz

Zde prezentovaná data, zejména celá databáze, nesmějí být kopírována. Je zakázáno data nebo celou databázi bez předchozího písemného svolení od společnosti TecAlliance kopírovat a distribuovat a/nebo toto jednání umožnit třetím osobám. Porušení zakládá neoprávněný zásah do autorského práva a bude stíháno.