... e-shop s autodíly!

Snímače a čidla VOLKSWAGEN CC B7 (358) 2.0 TDI 103kW

Autodíly a náhradní díly VOLKSWAGENAutodíly a náhradní díly VOLKSWAGEN CC B7 (358)Elektroinstalace VOLKSWAGEN CC B7 (358)Kategorie elektroinstalace v sobě skrývá mnoho velmi důležitých komponent vozu, které zajišťují veškeré ovládání a signalizaci vozu. Jsou to především startéry, alternátory, svíčky, relé, baterie, spínače, klaksony, kontrolky, čidla, blikače a další.

Vyberte výrobce......

Vyberte výrobce...

seřadit abecedně|od nejlevnějších|od nejdražších

  • VEMO ‐ Senzor tlaku sacího potrubí Original VEMO Quality VEM V10-72-1409

    zvětšitSenzor tlaku sacího potrubí VEMO ‐ VEM V10-72-1409
    1 269,-
    ve skladu
    Barva: ČernáBarva: černáPočet pólů: 3Hmotnost [kg]: 0,0109EAN:040460018138014046001813801AUDI06E 906 052 (06E906052)06K 906 052 (06K906052)06L 906 052 (06L906052)SEAT06E 906 052 (06E906052)6E906052ŠKODA06E 906 052 (06E906052)06K 906 052 (06K906052)06L 906 052 (06L906052)6E9060526K906052VOLKSWAGEN06E 906 052 (06E906052)06K 906 052 (06K906052)06L 906 052 (06L906052)06L90605206L906052A6K 906 052 (6K906052)VAG06E 906 052 (06E906052)06K 906 052 (06K906052)06L9060526E 906 052 (6E906052)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Senzor, regulace sklonu světlometu Green Mobility Parts VEM V10-72-1618

    zvětšitSenzor, regulace sklonu světlometu VEMO ‐ VEM V10-72-1618
    1 489,-
    ve skladu
    Montovaná strana: pravá přední nápravaVybavení vozidla: pro vozidla s regulací sklonu světlometů (automatickou)Doplňkový vyrobek / doplňkové info: s držákemPočet pólů: 4Doplňkový výrobek / doplňkové info 2: Se spojovací tyčíTvar zásuvky: tvar DEAN:040623752618574062375261857AUDI3C0 412 522 B (3C0412522B)SEAT3C0 412 522 B (3C0412522B)ŠKODA3C0 412 522 B (3C0412522B)VOLKSWAGEN3C0 412 522 B (3C0412522B)VAG3C0 412 522 B (3C0412522B)Konkurenční kódy 
    Všeobecné informace: In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
    Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.

  • VEMO ‐ Senzor, regulace sklonu světlometu Green Mobility Parts VEM V10-72-1616

    zvětšitSenzor, regulace sklonu světlometu VEMO ‐ VEM V10-72-1616
    3 559,-
    ve skladu
    Montovaná strana: levá přední nápravaDoplňkový výrobek / doplňkové info 2: Se spojovací tyčí s držákemVybavení vozidla: pro vozidla s regulací sklonu světlometů (automatickou)EAN:040623752371734062375237173VOLKSWAGEN3C0 412 521 B (3C0412521B)VAG3C0 412 521 B (3C0412521B)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač - teplota chladiva VEM V10-99-0001

    zvětšitSenzor teploty chladicí kapaliny VEMO ‐ VEM V10-99-0001
    319,-
    ve skladu
    Barva: ŠedáPrůměr [mm]: 26Počet pólů: 2Doplňkový výrobek / doplňkové info 2: s těsnicím kroužkemTvar pružiny: Zádržná pružinaDélka [mm]: 20Barva krytu: modráVýška [mm]: 57Barva: šedáPočet koncovek: 2Hmotnost [kg]: 0,02EAN:040460012728374046001272837AUDI05C91950106A 919 501 (06A919501)06A 919 501 A (06A919501A)06A 919 501 AS1 (06A919501AS1)06A 919 501 B (06A919501B)68001313AB6A 919 501 (6A919501)6A 919 501 A (6A919501A)6A 919 501 AS1 (6A919501AS1)6A 919 501 B (6A919501B)6A919501B6R0 919 501 (6R0919501)CHRYSLER68001313AA68001313ABK68001313ABCITROËN99760641000DODGE68001313AA68001313ABFORD1 100 736 (1100736)1 221 475 (1221475)1 459 209 (1459209)3M2110884AA6M2110884AAXM21 10884 BA (XM2110884BA)MAN05C91950106A919501MERCEDES-BENZ013 542 78 17 (0135427817)0249979748A 013 542 78 17 (A0135427817)A0249979748MITSUBISHIMN980152MN980264PORSCHE955 106 125 00 (95510612500)955 106 125 000 (955106125000)955 106 125 01 (95510612501)955 106 125 01 S1 (95510612501S1)997 606 410 00 (99760641000)99970750840N90316801SEAT05C91950106A 919 501 (06A919501)06A 919 501 A (06A919501A)06A 919 501 AS1 (06A919501AS1)06A 919 501 B (06A919501B)6A 919 501 (6A919501)6A 919 501 A (6A919501A)6A 919 501 AS1 (6A919501AS1)6A 919 501 B (6A919501B)6A919501B6R0 919 501 (6R0919501)ŠKODA05C91950106A 919 501 (06A919501)06A 919 501 A (06A919501A)06A 919 501 B (06A919501B)06A 919 501 BS1 (06A919501BS1)6A 919 501 (6A919501)6A 919 501 A (6A919501A)6A 919 501 B (6A919501B)6A 919 501 BS1 (6A919501BS1)6A919501B6R0 919 501 (6R0919501)N 903 168 01 (N90316801)N90316801VOLKSWAGEN06A 919 501 (06A919501)06A 919 501 A (06A919501A)06A 919 501 AS1 (06A919501AS1)06A 919 501 B (06A919501B)6A 919 501 (6A919501)6A 919 501 A (6A919501A)6A 919 501 AS1 (6A919501AS1)6A 919 501 B (6A919501B)6A919501B6R0 919 501 (6R0919501)VAG06A 919 501 (06A919501)06A 919 501 A (06A919501A)06A 919 501 B (06A919501B)6A 919 501 (6A919501)6A 919 501 A (6A919501A)BENTLEY06A 919 501 (06A919501)06A 919 501 A (06A919501A)EVOBUSA0135427817JEEP1068001313AB68001313AA68001313ABK68001313ABSTANDARD AUTOMOBILETS608CUPRA06A91950106A919501A06A919501BKonkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač kontrolního systém tlaku v pneumatikách EXPERT KITS + VEM V10-72-0832

    zvětšitSnímač kontrolního systém tlaku v pneumatikách VEMO ‐ VEM V10-72-0832
    1 789,-
    ve skladu
    Barva: Stříbrnáčíslo podvozku: 3C-C-700 001Utahovací moment [Nm]: 4Způsob montáže: sešroubovanýTyp ventilu: vzduchový ventilVybavení vozidla: pro vozidla s kontrolním systémem tlaku v pneumatikáchDoplňkový výrobek / doplňkové info 2: s ventily se šroubemFrekvence [MHz]: 433Sada úplná Doporučený interval výměny [km]: 160000Doporučený interval výměny [roky]: 5Materiál dříku ventilu: hliníkDoplňkový vyrobek / doplňkové info: s montážním nářadímDbát zadání výrobce vozidla EAN:040460018956474046001895647AUDI36142360420361468728874D0 907 275 (4D0907275)4D0 907 275 B (4D0907275B)4D0 907 275 C (4D0907275C)4D0 907 275 E (4D0907275E)BMW2 360 420 (2360420)36 11 2 360 420 (36112360420)36 11 8 378 682 (36118378682)36 14 6 752 128 (36146752128)36142360420361468728876 752 128 (6752128)8 378 682 (8378682)MERCEDES-BENZ0009055705554223188223306A000 822 33 06 (A0008223306)A005 542 23 18 (A0055422318)PORSCHE955 361 661 00 (95536166100)955 361 661 01 (95536166101)955 361 661 02 (95536166102)958 361 661 00 (95836166100)997 606 021 00 (99760602100)997 606 021 01 (99760602101)99760602102SEAT4D0 907 275 (4D0907275)4D0 907 275 B (4D0907275B)4D0 907 275 C (4D0907275C)7L0 907 275 (7L0907275)7L0 907 275 B (7L0907275B)ŠKODA4D0 907 275 (4D0907275)4D0 907 275 B (4D0907275B)4D0 907 275 C (4D0907275C)4D0 907 275 E (4D0907275E)7L0 907 275 (7L0907275)7L0 907 275 B (7L0907275B)VOLKSWAGEN4D0 907 275 (4D0907275)4D0 907 275 C (4D0907275C)4D0 907 275 E (4D0907275E)VAG4D0 907 275 (4D0907275)4D0 907 275 B (4D0907275B)4D0 907 275 C (4D0907275C)4D0 907 275 E (4D0907275E)7L0 907 275 (7L0907275)7L0 907 275 B (7L0907275B)7L0 907 275 D (7L0907275D)MASERATI224549ASTON MARTIN1R123610357LAND ROVERYDB000061BAJAJ REat70000at70001Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač kontrolního systém tlaku v pneumatikách EXPERT KITS + VEM V10-72-0835

    zvětšitSnímač kontrolního systém tlaku v pneumatikách VEMO ‐ VEM V10-72-0835
    1 659,-
    ve skladu
    Barva: StříbrnáUtahovací moment [Nm]: 4Způsob montáže: sešroubovanýTyp ventilu: vzduchový ventilVybavení vozidla: pro vozidla s kontrolním systémem tlaku v pneumatikáchDoplňkový výrobek / doplňkové info 2: se šroubem s ventilyFrekvence [MHz]: 433Sada úplná Doporučený interval výměny [km]: 160000Doporučený interval výměny [roky]: 5Materiál dříku ventilu: hliníkDbát zadání výrobce vozidla Pro OE číslo: 5Q0907275FHmotnost [kg]: 0,029EAN:040460018962174046001896217Použitá čísla: 5Q0907275F
    AUDI5Q0 907 275 (5Q0907275)5Q0 907 275 B (5Q0907275B)PAB907275BMW36 10 6 798 872 (36106798872)36 10 6 874 830 (36106874830)6 798 872 (6798872)6 874 830 (6874830)SEAT5Q0 907 275 (5Q0907275)ŠKODA5Q0 907 275 (5Q0907275)5Q0 907 275 B (5Q0907275B)VOLKSWAGEN5Q0 907 275 (5Q0907275)5Q0 907 275 B (5Q0907275B)5Q0907275FSSANGYONG4199035000VAG5Q0 907 275 (5Q0907275)5Q0 907 275 B (5Q0907275B)9A7 907 275 02 (9A790727502)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač množství protékajícího vzduchu Q+, original equipment manufacturer quality VEM V10-72-1274

    zvětšitSnímač množství protékajícího vzduchu VEMO ‐ VEM V10-72-1274
    2 089,-
    ve skladu
    Počet pólů: 4Nový díl Zpětné vracení starého dílu není vyžadováno Doporučené rozšíření opravy: Vzduchový filtrHmotnost [kg]: 0,175EAN:040460016248724046001624872AUDI03L 906 461 A (03L906461A)3L906461ASEAT03L 906 461 A (03L906461A)3L906461AŠKODA03L 906 461 A (03L906461A)3L906461AVOLKSWAGEN03L 906 461 A (03L906461A)3L906461AVAG03L 906 461 A (03L906461A)3L 906 461 A (3L906461A)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač počtu otáček kol Original VEMO Quality VEM V10-72-1311

    zvětšitSnímač počtu otáček kol VEMO ‐ VEM V10-72-1311
    599,-
    ve skladu
    Montovaná strana: levá zadní nápravaBrzdná / jízdní dynamika: pro vozidla s ABSJmenovité napětí [V]: 12Požadovaný počet kusů: 1Typ snímače: Hallův senzor aktivní senzorPočet pólů: 2Doplňkový výrobek / doplňkové info 2: bez kabeluHmotnost [kg]: 0,01EAN:040460016992694046001699269AUDI1K0 927 807 A (1K0927807A)WHT 003 859 A (WHT003859A)WHT 003 859 B (WHT003859B)SEAT1K0 927 807 A (1K0927807A)WHT 003 859 A (WHT003859A)WHT 003 859 B (WHT003859B)ŠKODA1K0 927 807 A (1K0927807A)WHT 003 859 A (WHT003859A)WHT 003 859 B (WHT003859B)VOLKSWAGEN1K0 927 807 A (1K0927807A)WHT 003 859 A (WHT003859A)WHT 003 859 B (WHT003859B)WHT003859DVAG1K0 927 807 A (1K0927807A)WHT 003 859 A (WHT003859A)WHT 003 859 B (WHT003859B)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač polohy vačkového hřídele Original VEMO Quality VEM V10-72-1229

    zvětšitSnímač polohy vačkového hřídele VEMO ‐ VEM V10-72-1229
    489,-
    ve skladu
    Hmotnost [kg]: 0,07275Hmotnost [kg]: 0,0728EAN:040460015117834046001511783AUDI03L 907 601 (03L907601)03L 957 147 (03L957147)03L 957 147 A (03L957147A)3L 907 601 (3L907601)3L 957 147 (3L957147)3L957147ASEAT03L 907 601 (03L907601)03L 957 147 (03L957147)03L 957 147 A (03L957147A)3L 957 147 (3L957147)3L9076013L957147AŠKODA03L 907 601 (03L907601)03L 957 147 (03L957147)03L 957 147 A (03L957147A)3L 957 147 (3L957147)3L9076013L957147AVOLKSWAGEN03L 907 601T (03L907601T)03L 957 147 (03L957147)03L 957 147 A (03L957147A)3L 907 601 (3L907601)3L 907 601T (3L907601T)3L 957 147 (3L957147)3L957147AVAG03L 907 601 (03L907601)03L 957 147 (03L957147)03L 957 147 A (03L957147A)3L 957 147 (3L957147)3L 957 147 A (3L957147A)STANDARD AUTOMOBILEPC836PC839BAJAJ REat10635Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač teploty interiéru VEM V10-72-0949

    zvětšitSnímač teploty interiéru VEMO ‐ VEM V10-72-0949
    279,-
    ve skladu
    Vybavení vozidla: pro vozidla s automatickou klimatizací pro vozidla s klimatizací (manuální)Průměr [mm]: 25Výška [mm]: 52Počet koncovek: 2Hmotnost [kg]: 0,08EAN:040460013312204046001331220AUDI1J0 907 543 (1J0907543)1J0 907 543 B (1J0907543B)1K0 907 543 A (1K0907543A)1K0 907 543 G (1K0907543G)99657392500SEAT1J0 907 543 (1J0907543)1J0 907 543 B (1J0907543B)1K0 907 543 A (1K0907543A)1K0 907 543 G (1K0907543G)ŠKODA1J0 907 543 (1J0907543)1J0 907 543 B (1J0907543B)1K0 907 543 A (1K0907543A)1K0 907 543 G (1K0907543G)VOLKSWAGEN1J0 907 543 (1J0907543)1J0 907 543 B (1J0907543B)1K0 907 543 A (1K0907543A)1K0 907 543 G (1K0907543G)1K0907543GVAG1J0 907 543 (1J0907543)1J0 907 543 B (1J0907543B)1K0 907 543 A (1K0907543A)1K0 907 543 G (1K0907543G)1K0907543GBAJAJ REat10662Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
sbalit vše nahoru
Vše o nákupu
Zákaznický účet
Technický rádce
O společnosti

Logo Heuréka

Tento e-shop měl za posledních 90 dní tisíce spokojených zákazníků.


Logo Zboží.cz

Zde prezentovaná data, zejména celá databáze, nesmějí být kopírována. Je zakázáno data nebo celou databázi bez předchozího písemného svolení od společnosti TecAlliance kopírovat a distribuovat a/nebo toto jednání umožnit třetím osobám. Porušení zakládá neoprávněný zásah do autorského práva a bude stíháno.

Copyright © 2002 - 2026 Autokšeft, s.r.o.
 

Tento web využívá k některým funkcím, jako je přihlašování, analýza návštěvnosti nebo personalizece reklam, soubory cookie. Také dovolujeme našim důvěryhodným partnerům analyzovat využívání našich stránek.