... e-shop s autodíly!

Díly chlazení motoru AUDI A4 B5 Avant (8D5) 2.8 quattro 142kW

Autodíly a náhradní díly AUDIAutodíly a náhradní díly AUDI A4 B5 Avant (8D5)Chlazení, topení a klimatizace AUDI A4 B5 Avant (8D5)Chladící systém motoru ochlazuje chladící kapalinu ohřátou spalovacím procesem v motoru a reguluje její teplotu. Odebrané teplo je odváděno mimo vůz. Kategorie chlazení obsahuje chladící jednotky, větráky, termostaty, relé, hadice, spínače a další.

Vyberte výrobce......

Vyberte výrobce...

seřadit abecedně|od nejlevnějších|od nejdražších

  • VAICO ‐ Hadice chladiče VAC V10-0895

    zvětšitHadice chladiče VAICO ‐ VAC V10-0895
    449,-ve skladu
    Montovaná strana: nahořečíslo motoru: 9516 4197Materiál: Guma s textilní vložkouPřední/zpětný chod: pro chod vpředHadice chladicí soustavy: od chladiče motoru po vodní potrubíHmotnost [kg]: 0,225EAN:040460014978414046001497841AUDI8D0 121 101 K (8D0121101K)SEAT8D0 121 101 K (8D0121101K)ŠKODA8D0 121 101 K (8D0121101K)VOLKSWAGEN8D0 121 101 K (8D0121101K)VAG8D0 121 101 K (8D0121101K)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Hadice chladiče VAC V10-4653

    zvětšitHadice chladiče VAICO ‐ VAC V10-4653
    429,-ve skladu
    Číslo podvozku (VIN) do: 8D-X-400000Hmotnost [kg]: 0,073EAN:040460018195064046001819506SEAT078 121 058 H (078121058H)078 121 058 M (078121058M)78121058MŠKODA078 121 058 H (078121058H)078 121 058 M (078121058M)78121058MVOLKSWAGEN078 121 058 H (078121058H)078 121 058 M (078121058M)78121058HVAG078 121 058 M (078121058M)78 121 058 M (78121058M)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Hadice chladiče Original VAICO Quality VAC V10-5109

    zvětšitHadice chladiče VAICO ‐ VAC V10-5109
    135,-ve skladu
    Kód motoru: AMXEAN:040460019005014046001900501Použitá čísla: 1091228, VAV10-5109-078121188B
    SEAT078 121 188 B (078121188B)ŠKODA078 121 188 B (078121188B)VOLKSWAGEN078 121 188 B (078121188B)VAG078 121 188 B (078121188B)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Nemrznoucí kapalina do chladiče 1,5 l VAC V60-0019

    zvětšitNemrznoucí kapalina VAICO ‐ VAC V60-0019
    189,-ve skladu
    Barva: FialováVelikost balení: 1,5 lViskozitní třída SAE: VA-012+Doporučení výrobce oleje: WSS M97B44 D 6277M TL 774 F 325.3 TL 774 DKoncentrát Chemická vlastnost: bezaminový bezfosfátový s obsahem silikátu bez nitridu boratfreiDoporučený interval výměny [roky]: 2Dbát zadání výrobce vozidla Dbát na objem náplně systému Typ kontejneru: LáhevVýška [mm]: 260Délka [mm]: 70šířka [mm]: 125,0číslo výrobku doporučeného příslušenství: V99-1005Hmotnost [kg]: 1,799EAN:040460012824094046001282409Použitá čísla: AFNOR NF R15-601, AS 2108-2004, ASTM D 3306, ASTM D 4985, BS 6580:2010, CUNA NC 596-16, DEXCOOL, Ford WSS-M 97B44-D, Ford WSS-M97B44-D, Frostschutz, G12 Plus, G30, GM 1825M, GM 1899M, GM 6277 M / MAN 324 Typ SNF, GM 6277M, GM Saturn, Kühlerfrostschutz, Kühlmittel, MAN 324 SNF, MB 325.3, MB 325.3 / OE: 000 989 08 25 98, SAE J 1034, VA-012 Plus, VW G 012 A8G M1, VW G 012 A8F A1 / VW TL 774 F/D, VW TL 774 D, VW TL 774 F
    AUDIG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)G 013 A8J 1G (G013A8J1G)G01 2A8 FM1 (G012A8FM1)G013A8J1GG12G12+ (G12)FORD1 020 121 (1020121)1 047 034 (1047034)1 113 805 (1113805)1 222 110 (1222110)1 222 116 (1222116)1 336 797 (1336797)1 931 955 (1931955)1 931 964 (1931964)1 931 966 (1931966)2 107 116 (2107116)2 361 569 (2361569)2 361 571 (2361571)2U2J 19544 AA2A (2U2J19544AA2A)2U2J 19544 BA1A (2U2J19544BA1A)2U2J 19544 EA2C (2U2J19544EA2C)2U2J19544BA1A4U7J 19544 AA2A (4U7J19544AA2A)4U7J19544AA2A5 009 920 (5009920)5 022 306 (5022306)5 023 819 (5023819)5 023 830 (5023830)ESEM 978B4 HA (ESEM978B4HA)FU7J 19544 AD (FU7J19544AD)FU7J 19544 BD (FU7J19544BD)FU7J 19544 DA (FU7J19544DA)FU7J 19544 EA (FU7J19544EA)WSS-M97B44-D (WSSM97B44D)WSSM 97B4 4D (WSSM97B44D)MAN324 Typ SNF (324TypSNF)MERCEDES-BENZ000 989 16 25 (0009891625)325.3 (3253)A 000 989 16 25 (A0009891625)OPEL19 40 650 (1940650)19 40 663 (1940663)93 170 402 (93170402)SEATG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)G01 2A8 FM1 (G012A8FM1)G12G12+ (G12)ŠKODAG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)G 012 A8F M1 (G012A8FM1)G01 2A8 FM1 (G012A8FM1)G12G12+ (G12)VOLKSWAGENG 012 A8C A1 (G012A8CA1)G 012 A8C A8 (G012A8CA8)G 012 A8D A1 (G012A8DA1)G 012 A8D A8 (G012A8DA8)G 012 A8F A1 (G012A8FA1)G 012 A8F M1 (G012A8FM1)G 012 A8F M2 (G012A8FM2)G 012 A8F M8 (G012A8FM8)G 012 A8F M9 (G012A8FM9)G 013 A8J 1G (G013A8J1G)G013A8J1GG12G12+ (G12)N 052 774 F0 (N052774F0)TL 774 D (TL774D)TL 774 F (TL774F)TL 774 F/D (TL774FD)VAGG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)N 052 774 F0 (N052774F0)TL 774 F (TL774F)GENERAL MOTORS9194431931 704 02 (93170402)GM 1825M (GM1825M)GM 1899M (GM1899M)GM 6277M (GM6277M)FORD USA2U2J19544BA1A4U7J19544AA2AKonkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Příruba chladiva VAC V10-8199

    zvětšitPříruba chladiva VAICO ‐ VAC V10-8199
    72,-ve skladu
    Montovaná strana: leváHmotnost [kg]: 0,097EAN:040460013508014046001350801AUDI028 121 132 (028121132)2812113228121133SEAT028 121 132 (028121132)2812113228121133ŠKODA028 121 132 (028121132)2812113228121133VOLKSWAGEN028 121 132 (028121132)2812113228121133VAG028 121 132 (028121132)02812113228 121 132 (28121132)FARESIN3542Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Těsnicí kroužek šroubu chladiče VAC V10-2598

    zvětšitTěsnicí kroužek šroubu chladiče VAICO ‐ VAC V10-2598
    16,-ve skladu
    číslo podvozku: 8D-T-309403Tloušťka / síla [mm]: 3,8Vnější průměr [mm]: 28,5Materiál: GumaHmotnost [kg]: 0,0062EAN:040460015873684046001587368AUDI1H0 121 687 (1H0121687)1H0 121 687 A (1H0121687A)SEAT1H0 121 687 (1H0121687)1H0 121 687 A (1H0121687A)ŠKODA1H0 121 687 (1H0121687)1H0 121 687 A (1H0121687A)VOLKSWAGEN1H0 121 687 (1H0121687)1H0 121 687 A (1H0121687A)VAG1H0 121 687 (1H0121687)1H0 121 687 A (1H0121687A)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Uzavírací víčko VAC V10-0209

    zvětšitUzavírací víčko, nádoba chladiva VAICO ‐ VAC V10-0209
    100,-ve skladu
    Barva: Modráčíslo podvozku: 8D-T-309403Číslo podvozku (VIN) do: 8D-T-309402Materiál: PlastTlak od: 1,5Hmotnost [kg]: 0,1191EAN:040460013372774046001337277AUDI1J0 121 321 (1J0121321)1J0 121 321 A (1J0121321A)1J0 121 321 B (1J0121321B)8D0 121 403 C (8D0121403C)PORSCHE955 106 447 20 (95510644720)SEAT1J0 121 321 (1J0121321)1J0 121 321 A (1J0121321A)1J0 121 321 B (1J0121321B)8D0 121 403 C (8D0121403C)ŠKODA1J0 121 321 (1J0121321)1J0 121 321 A (1J0121321A)1J0 121 321 B (1J0121321B)8D0 121 403 C (8D0121403C)VOLKSWAGEN1J0 121 321 (1J0121321)1J0 121 321 A (1J0121321A)1J0 121 321 B (1J0121321B)8D0 121 403 C (8D0121403C)VAG1J0 121 321 (1J0121321)1J0 121 321 A (1J0121321A)1J0 121 321 B (1J0121321B)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Uzavírací víčko VAC V10-0018

    zvětšitUzavírací víčko, nádoba chladiva VAICO ‐ VAC V10-0018
    45,-ve skladu
    Barva: Modráčíslo motoru: 4197 9516Hmotnost [kg]: 0,089EAN:040460011384164046001138416AUDI171 121 321 (171121321)171 121 321 B (171121321B)171 121 321 D (171121321D)171 121 321 F (171121321F)443 121 321 (443121321)54712132199610644704SEAT171 121 321 (171121321)171 121 321 B (171121321B)171 121 321 D (171121321D)443 121 321 (443121321)ŠKODA171 121 321 (171121321)171 121 321 D (171121321D)443 121 321 (443121321)VOLKSWAGEN171 121 321 (171121321)171 121 321 B (171121321B)171 121 321 D (171121321D)171 121 321 F (171121321F)443 121 321 (443121321)547 121 321 (547121321)VAG171 121 321 B (171121321B)171 121 321 D (171121321D)171 121 321 F (171121321F)443 121 321 (443121321)547 121 321 (547121321)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Vedení chladicí kapaliny VAC V10-5205

    zvětšitVedení chladicí kapaliny VAICO ‐ VAC V10-5205
    2 349,-ve skladu
    Montovaná strana: vrchní leváHmotnost [kg]: 0,775EAN:040623750023824062375002382SEAT078 121 070 BA (078121070BA)078 121 070 BB (078121070BB)078 121 070 CF (078121070CF)ŠKODA078 121 070 BA (078121070BA)078 121 070 BB (078121070BB)078 121 070 CF (078121070CF)VOLKSWAGEN078 121 070 CF (078121070CF)078121070BA078121070BB78121070SVAG078 121 070 BA (078121070BA)078 121 070 BB (078121070BB)078 121 070 CF (078121070CF)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Vyrovnávací nádoba chladicí kapaliny VAC V10-0556

    zvětšitVyrovnávací nádoba chladicí kapaliny VAICO ‐ VAC V10-0556
    459,-ve skladu
    číslo motoru: 13930 13931 34900 26491 13932číslo motoru: 9516 4197číslo podvozku: 8D-W-000 001Pro OE číslo: 8D0 121 403 LHmotnost [kg]: 0,6EAN:040460013421964046001342196AUDI8D0 121 403 F (8D0121403F)8D0 121 403 J (8D0121403J)8D0 121 403 L (8D0121403L)SEAT8D0 121 403 F (8D0121403F)8D0 121 403 J (8D0121403J)8D0 121 403 L (8D0121403L)8D0121403LŠKODA8D0 121 403 F (8D0121403F)8D0 121 403 J (8D0121403J)8D0 121 403 L (8D0121403L)VOLKSWAGEN8D0 121 403 F (8D0121403F)8D0 121 403 J (8D0121403J)8D0 121 403 L (8D0121403L)VAG8D0 121 403 F (8D0121403F)8D0 121 403 J (8D0121403J)8D0 121 403 L (8D0121403L)FARESIN3548CUPRA8D0121403LKonkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
sbalit vše nahoru
Vše o nákupu
Zákaznický účet
Technický rádce
O společnosti

Logo Heuréka

Tento e-shop měl za posledních 90 dní tisíce spokojených zákazníků.


Logo Zboží.cz

Zde prezentovaná data, zejména celá databáze, nesmějí být kopírována. Je zakázáno data nebo celou databázi bez předchozího písemného svolení od společnosti TecAlliance kopírovat a distribuovat a/nebo toto jednání umožnit třetím osobám. Porušení zakládá neoprávněný zásah do autorského práva a bude stíháno.

Copyright © 2002 - 2025 Autokšeft, s.r.o.
 

Tento web využívá k některým funkcím, jako je přihlašování, analýza návštěvnosti nebo personalizece reklam, soubory cookie. Také dovolujeme našim důvěryhodným partnerům analyzovat využívání našich stránek.