... e-shop s autodíly!

Díly chlazení motoru AUDI A4 B5 Avant (8D5) 1.8 T quattro 110kW

Autodíly a náhradní díly AUDIAutodíly a náhradní díly AUDI A4 B5 Avant (8D5)Chlazení, topení a klimatizace AUDI A4 B5 Avant (8D5)Chladící systém motoru ochlazuje chladící kapalinu ohřátou spalovacím procesem v motoru a reguluje její teplotu. Odebrané teplo je odváděno mimo vůz. Kategorie chlazení obsahuje chladící jednotky, větráky, termostaty, relé, hadice, spínače a další.

Vyberte výrobce......

Vyberte výrobce...

seřadit abecedně|od nejlevnějších|od nejdražších

  • VAICO ‐ Hadice chladiče VAC V10-2818

    zvětšitHadice chladiče VAICO ‐ VAC V10-2818
    669,-ve skladu
    Montovaná strana: tlačítkoPřední/zpětný chod: pro zpětný chodHmotnost [kg]: 0,429EAN:040460016040724046001604072AUDI8D0 121 055 G (8D0121055G)SEAT8D0 121 055 G (8D0121055G)ŠKODA8D0 121 055 G (8D0121055G)VOLKSWAGEN8D0 121 055 G (8D0121055G)VAG8D0 121 055 G (8D0121055G)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Hadice chladiče VAC V10-0895

    zvětšitHadice chladiče VAICO ‐ VAC V10-0895
    449,-ve skladu
    Montovaná strana: nahořečíslo motoru: 13929 13949 4199 15335 13950Materiál: Guma s textilní vložkouPřední/zpětný chod: pro chod vpředHadice chladicí soustavy: od chladiče motoru po vodní potrubíHmotnost [kg]: 0,225EAN:040460014978414046001497841AUDI8D0 121 101 K (8D0121101K)SEAT8D0 121 101 K (8D0121101K)ŠKODA8D0 121 101 K (8D0121101K)VOLKSWAGEN8D0 121 101 K (8D0121101K)VAG8D0 121 101 K (8D0121101K)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Hadice chladiče VAC V10-2811

    zvětšitHadice chladiče VAICO ‐ VAC V10-2811
    739,-ve skladu
    Hadice chladicí soustavy: Koncovka potrubí - chladič topeníčíslo motoru: 15335 13949 13950Levo-/pravostranné řízení: pro levostranně řízená vozidlaPřední/zpětný chod: pro chod vpředHadice chladicí soustavy: od spoj.potrubí po chladič topeníHmotnost [kg]: 0,221EAN:040460016039904046001603990AUDI8D0 819 371 H (8D0819371H)SEAT8D0 819 371 H (8D0819371H)ŠKODA8D0 819 371 H (8D0819371H)VOLKSWAGEN8D0 819 371 H (8D0819371H)VAG8D0 819 371 H (8D0819371H)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Hadice chladiče Q+, original equipment manufacturer quality VAC V10-4673

    zvětšitHadice chladiče VAICO ‐ VAC V10-4673
    69,-ve skladu
    Kód motoru: ANB/APU/ARK/AWTMateriál: Guma s textilní vložkouHmotnost [kg]: 0,063EAN:040460018180594046001818059AUDI058 121 058 R (058121058R)SEAT058 121 058 R (058121058R)58121058RŠKODA058 121 058 R (058121058R)58121058RVOLKSWAGEN058 121 058 R (058121058R)VAG058 121 058 R (058121058R)58 121 058 R (58121058R)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Nemrznoucí kapalina do chladiče 1,5 l VAC V60-0019

    zvětšitNemrznoucí kapalina VAICO ‐ VAC V60-0019
    189,-ve skladu
    Barva: FialováVelikost balení: 1,5 lViskozitní třída SAE: VA-012+Doporučení výrobce oleje: WSS M97B44 D 6277M TL 774 F 325.3 TL 774 DKoncentrát Chemická vlastnost: bezaminový bezfosfátový s obsahem silikátu bez nitridu boratfreiDoporučený interval výměny [roky]: 2Dbát zadání výrobce vozidla Dbát na objem náplně systému Typ kontejneru: LáhevVýška [mm]: 260Délka [mm]: 70šířka [mm]: 125,0číslo výrobku doporučeného příslušenství: V99-1005Hmotnost [kg]: 1,799EAN:040460012824094046001282409Použitá čísla: AFNOR NF R15-601, AS 2108-2004, ASTM D 3306, ASTM D 4985, BS 6580:2010, CUNA NC 596-16, DEXCOOL, Ford WSS-M 97B44-D, Ford WSS-M97B44-D, Frostschutz, G12 Plus, G30, GM 1825M, GM 1899M, GM 6277 M / MAN 324 Typ SNF, GM 6277M, GM Saturn, Kühlerfrostschutz, Kühlmittel, MAN 324 SNF, MB 325.3, MB 325.3 / OE: 000 989 08 25 98, SAE J 1034, VA-012 Plus, VW G 012 A8G M1, VW G 012 A8F A1 / VW TL 774 F/D, VW TL 774 D, VW TL 774 F
    AUDIG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)G 013 A8J 1G (G013A8J1G)G01 2A8 FM1 (G012A8FM1)G013A8J1GG12G12+ (G12)FORD1 020 121 (1020121)1 047 034 (1047034)1 113 805 (1113805)1 222 110 (1222110)1 222 116 (1222116)1 336 797 (1336797)1 931 955 (1931955)1 931 964 (1931964)1 931 966 (1931966)2 107 116 (2107116)2 361 569 (2361569)2 361 571 (2361571)2U2J 19544 AA2A (2U2J19544AA2A)2U2J 19544 BA1A (2U2J19544BA1A)2U2J 19544 EA2C (2U2J19544EA2C)2U2J19544BA1A4U7J 19544 AA2A (4U7J19544AA2A)4U7J19544AA2A5 009 920 (5009920)5 022 306 (5022306)5 023 819 (5023819)5 023 830 (5023830)ESEM 978B4 HA (ESEM978B4HA)FU7J 19544 AD (FU7J19544AD)FU7J 19544 BD (FU7J19544BD)FU7J 19544 DA (FU7J19544DA)FU7J 19544 EA (FU7J19544EA)WSS-M97B44-D (WSSM97B44D)WSSM 97B4 4D (WSSM97B44D)MAN324 Typ SNF (324TypSNF)MERCEDES-BENZ000 989 16 25 (0009891625)325.3 (3253)A 000 989 16 25 (A0009891625)OPEL19 40 650 (1940650)19 40 663 (1940663)93 170 402 (93170402)SEATG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)G01 2A8 FM1 (G012A8FM1)G12G12+ (G12)ŠKODAG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)G 012 A8F M1 (G012A8FM1)G01 2A8 FM1 (G012A8FM1)G12G12+ (G12)VOLKSWAGENG 012 A8C A1 (G012A8CA1)G 012 A8C A8 (G012A8CA8)G 012 A8D A1 (G012A8DA1)G 012 A8D A8 (G012A8DA8)G 012 A8F A1 (G012A8FA1)G 012 A8F M1 (G012A8FM1)G 012 A8F M2 (G012A8FM2)G 012 A8F M8 (G012A8FM8)G 012 A8F M9 (G012A8FM9)G 013 A8J 1G (G013A8J1G)G013A8J1GG12G12+ (G12)N 052 774 F0 (N052774F0)TL 774 D (TL774D)TL 774 F (TL774F)TL 774 F/D (TL774FD)VAGG 012 A8D A1 (G012A8DA1)G 012 A8F A1 (G012A8FA1)N 052 774 F0 (N052774F0)TL 774 F (TL774F)GENERAL MOTORS9194431931 704 02 (93170402)GM 1825M (GM1825M)GM 1899M (GM1899M)GM 6277M (GM6277M)FORD USA2U2J19544BA1A4U7J19544AA2AKonkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Příruba chladiva VAC V10-8199

    zvětšitPříruba chladiva VAICO ‐ VAC V10-8199
    72,-ve skladu
    Montovaná strana: leváHmotnost [kg]: 0,097EAN:040460013508014046001350801AUDI028 121 132 (028121132)2812113228121133SEAT028 121 132 (028121132)2812113228121133ŠKODA028 121 132 (028121132)2812113228121133VOLKSWAGEN028 121 132 (028121132)2812113228121133VAG028 121 132 (028121132)02812113228 121 132 (28121132)FARESIN3542Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Příruba chladiva VAC V10-8205

    zvětšitPříruba chladiva VAICO ‐ VAC V10-8205
    130,-ve skladu
    Montovaná strana: válcová hlavaDoplňkový vyrobek / doplňkové info: s těsněnímHmotnost [kg]: 0,11EAN:040460013596064046001359606AUDI058 121 132 A (058121132A)058 121 132 C (058121132C)58 121 132 A (58121132A)58 121 132 C (58121132C)SEAT058 121 132 A (058121132A)058 121 132 C (058121132C)58 121 132 A (58121132A)58 121 132 C (58121132C)ŠKODA058 121 132 A (058121132A)058 121 132 C (058121132C)58121132A58121132CVOLKSWAGEN058 121 132 A (058121132A)058 121 132 C (058121132C)58121132A58121132CVAG058 121 132 A (058121132A)058 121 132 C (058121132C)058121132A058121132C58 121 132 A (58121132A)58 121 132 C (58121132C)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Příruba chladiva VAC V10-0283

    zvětšitPříruba chladiva VAICO ‐ VAC V10-0283
    112,-ve skladu
    Montovaná strana: nahořeHmotnost [kg]: 0,061EAN:040460012602164046001260216AUDI030 121 121 (030121121)030 121 121 B (030121121B)055 121 121 E (055121121E)3012112130121121B55 121 121 E (55121121E)SEAT030 121 121 (030121121)030 121 121 B (030121121B)055 121 121 E (055121121E)3012112130121121B55121121EŠKODA030 121 121 (030121121)030 121 121 B (030121121B)055 121 121 E (055121121E)3012112130121121B55121121EVOLKSWAGEN030 121 121 (030121121)030 121 121 B (030121121B)055 121 121 E (055121121E)301 211 21 (30121121)30121121B55 121 121 E (55121121E)VAG030 121 121 (030121121)030 121 121 B (030121121B)30 121 121 B (30121121B)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Těsnicí kroužek šroubu chladiče VAC V10-2598

    zvětšitTěsnicí kroužek šroubu chladiče VAICO ‐ VAC V10-2598
    16,-ve skladu
    číslo podvozku: 8D-T-309403Tloušťka / síla [mm]: 3,8Vnější průměr [mm]: 28,5Materiál: GumaHmotnost [kg]: 0,0062EAN:040460015873684046001587368AUDI1H0 121 687 (1H0121687)1H0 121 687 A (1H0121687A)SEAT1H0 121 687 (1H0121687)1H0 121 687 A (1H0121687A)ŠKODA1H0 121 687 (1H0121687)1H0 121 687 A (1H0121687A)VOLKSWAGEN1H0 121 687 (1H0121687)1H0 121 687 A (1H0121687A)VAG1H0 121 687 (1H0121687)1H0 121 687 A (1H0121687A)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VAICO ‐ Uzavírací víčko VAC V10-0209

    zvětšitUzavírací víčko, nádoba chladiva VAICO ‐ VAC V10-0209
    100,-ve skladu
    Barva: Modráčíslo podvozku: 8D-T-309403Číslo podvozku (VIN) do: 8D-T-309402Materiál: PlastTlak od: 1,5Hmotnost [kg]: 0,1191EAN:040460013372774046001337277AUDI1J0 121 321 (1J0121321)1J0 121 321 A (1J0121321A)1J0 121 321 B (1J0121321B)8D0 121 403 C (8D0121403C)PORSCHE955 106 447 20 (95510644720)SEAT1J0 121 321 (1J0121321)1J0 121 321 A (1J0121321A)1J0 121 321 B (1J0121321B)8D0 121 403 C (8D0121403C)ŠKODA1J0 121 321 (1J0121321)1J0 121 321 A (1J0121321A)1J0 121 321 B (1J0121321B)8D0 121 403 C (8D0121403C)VOLKSWAGEN1J0 121 321 (1J0121321)1J0 121 321 A (1J0121321A)1J0 121 321 B (1J0121321B)8D0 121 403 C (8D0121403C)VAG1J0 121 321 (1J0121321)1J0 121 321 A (1J0121321A)1J0 121 321 B (1J0121321B)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
sbalit vše nahoru
Vše o nákupu
Zákaznický účet
Technický rádce
O společnosti

Logo Heuréka

Tento e-shop měl za posledních 90 dní tisíce spokojených zákazníků.


Logo Zboží.cz

Zde prezentovaná data, zejména celá databáze, nesmějí být kopírována. Je zakázáno data nebo celou databázi bez předchozího písemného svolení od společnosti TecAlliance kopírovat a distribuovat a/nebo toto jednání umožnit třetím osobám. Porušení zakládá neoprávněný zásah do autorského práva a bude stíháno.

Copyright © 2002 - 2025 Autokšeft, s.r.o.
 

Tento web využívá k některým funkcím, jako je přihlašování, analýza návštěvnosti nebo personalizece reklam, soubory cookie. Také dovolujeme našim důvěryhodným partnerům analyzovat využívání našich stránek.