... e-shop s autodíly!

Snímače a čidla AUDI A3 (8P1) 2.0 FSI 110kW

Autodíly a náhradní díly AUDIAutodíly a náhradní díly AUDI A3 (8P1)Elektroinstalace AUDI A3 (8P1)Kategorie elektroinstalace v sobě skrývá mnoho velmi důležitých komponent vozu, které zajišťují veškeré ovládání a signalizaci vozu. Jsou to především startéry, alternátory, svíčky, relé, baterie, spínače, klaksony, kontrolky, čidla, blikače a další.

Vyberte výrobce......

Vyberte výrobce...

seřadit abecedně|od nejlevnějších|od nejdražších

  • VEMO ‐ Senzor, regulace sklonu světlometu Green Mobility Parts VEM V10-72-0153

    zvětšitSenzor, regulace sklonu světlometu VEMO ‐ VEM V10-72-0153
    1 979,-
    ve skladu
    Montovaná strana: zadní nápravaNení pro PR číslo: UA6 UA7Vybavení vozidla: pro vozidla s regulací sklonu světlometů (automatickou)Doplňkový vyrobek / doplňkové info: s držákemPočet pólů: 4Doplňkový výrobek / doplňkové info 2: Se spojovací tyčíTvar zásuvky: tvar DEAN:040623752493814062375249381AUDI1K0 941 273 L (1K0941273L)SEAT1K0 941 273 L (1K0941273L)ŠKODA1K0 941 273 L (1K0941273L)VOLKSWAGEN1K0 941 273 (1K0941273)1K0 941 273 E (1K0941273E)1K0 941 273 L (1K0941273L)1K09412731K0941273E1T0 907 503 (1T0907503)VAG1K0 941 273 L (1K0941273L)1K0 941 273 N (1K0941273N)1T0 907 503 part (1T0907503part)N 011 183 12 part (N01118312part)N 104 343 01 part (N10434301part)Konkurenční kódy 
    Všeobecné informace: In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
    Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.

  • VEMO ‐ Senzor, regulace sklonu světlometu Original VEMO Quality VEM V10-72-0352

    zvětšitSenzor, regulace sklonu světlometu VEMO ‐ VEM V10-72-0352
    3 629,-
    ve skladu
    Montovaná strana: levá zadní nápravačíslo podvozku: 8P-9A000001 8P-9B000001Pro PR-číslo: UA6 UA7Doplňkový vyrobek / doplňkové info: s tyčovým ústrojímPárová čísla výrobku: V10-72-0353EAN:4062375412426Použitá čísla: 1097579
    AUDI8J0 941 307 A (8J0941307A)Konkurenční kódy 
    Všeobecné informace: In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
    Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.

  • VEMO ‐ Senzor, regulace sklonu světlometu Original VEMO Quality VEM V10-72-1275

    zvětšitSenzor, regulace sklonu světlometu VEMO ‐ VEM V10-72-1275
    2 859,-
    ve skladu
    Montovaná strana: předníVybavení vozidla: pro vozidla s regulací sklonu světlometů (automatickou)Pro PR-číslo: 8Q3 8Q5Do modelového roku: 2008EAN:040460016356184046001635618SEAT1K0 941 274 A (1K0941274A)1K0 941 274 B (1K0941274B)ŠKODA1K0 941 274 A (1K0941274A)1K0 941 274 B (1K0941274B)VOLKSWAGEN1K0 941 274 A (1K0941274A)1K0 941 274 B (1K0941274B)1K0941273L1K0941273M1K0941274A1K0941288B1T0 907 503 (1T0907503)1T0 907 503 B (1T0907503B)VAG1K0 941 274 A (1K0941274A)1K0 941 274 B (1K0941274B)1T0 907 503 part (1T0907503part)N 011 183 12 part (N01118312part)N 104 343 01 part (N10434301part)Konkurenční kódy 
    Všeobecné informace: In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
    Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.

  • VEMO ‐ Snímač - zapalovací impuls VEM V10-72-1042

    zvětšitSnímač zapalovacího impulsu VEMO ‐ VEM V10-72-1042
    409,-
    ve skladu
    Barva: ČernáTyp snímače: Hallův senzorPočet koncovek: 3Pro OE číslo: 06C 905 163 BBarva: černáTvar: rovnýPočet pólů: 3Jmenovité napětí [V]: 12Armatura [mm]: 24Doplňkový výrobek / doplňkové info 2: bez kabelu s těsnicím kroužkemTvar zásuvky: tvar DHmotnost [kg]: 0,014EAN:040460013517094046001351709Nahrazuje: V10-72-1042-1
    AUDI06C 905 163 B (06C905163B)6C 905 163 B (6C905163B)SEAT06C 905 163 B (06C905163B)6C 905 163 B (6C905163B)ŠKODA06C 905 163 B (06C905163B)6C 905 163 B (6C905163B)VOLKSWAGEN06C 905 163 B (06C905163B)6C 905 163 B (6C905163B)VAG06C 905 163 B (06C905163B)06C 905 163B (06C905163B)6C 905 163 B (6C905163B)6C 905 163B (6C905163B)VW/SEAT06C 905 163 B (06C905163B)6C 905 163 B (6C905163B)STANDARD AUTOMOBILE19066PC670BAJAJ REat10391Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač Green Mobility Parts VEM V10-72-1105

    zvětšitSnímač tlaku paliva VEMO ‐ VEM V10-72-1105
    809,-
    ve skladu
    Tvar zásuvky: oválnýHmotnost [kg]: 0,045EAN:040460013831204046001383120AUDI036 906 051 B (036906051B)03C 906 051 D (03C906051D)03C 906 051 G (03C906051G)06D 906 051 (06D906051)06D 906 051 A (06D906051A)06D 906 051 C (06D906051C)06H 906 051 (06H906051)06H 906 051 A (06H906051A)06J 906 051 C (06J906051C)36 906 051 B (36906051B)6D 906 051 (6D906051)6D 906 051 A (6D906051A)6H 906 051 A (6H906051A)SEAT036 906 051 B (036906051B)03C 906 051 D (03C906051D)03C 906 051 G (03C906051G)06D 906 051 A (06D906051A)06D 906 051 C (06D906051C)06H 906 051 (06H906051)06H 906 051 A (06H906051A)06J 906 051 C (06J906051C)36906051B3C906051D6D906051A6D906051C6H9060516H906051A6J906051CŠKODA036 906 051 B (036906051B)03C 906 051 D (03C906051D)03C 906 051 G (03C906051G)06D 906 051 A (06D906051A)06D 906 051 C (06D906051C)06H 906 051 (06H906051)06H 906 051 A (06H906051A)06J 906 051 C (06J906051C)36906051B3C906051D6D906051A6D906051C6H9060516H906051A6J906051CVOLKSWAGEN036 906 051 B (036906051B)03C 906 051 D (03C906051D)03C 906 051 G (03C906051G)06D 906 051 (06D906051)06D 906 051 A (06D906051A)06D 906 051 C (06D906051C)06H 906 051 (06H906051)06H 906 051 A (06H906051A)06J 906 051 C (06J906051C)06J906054L36 906 051 B (36906051B)6D 906 051 (6D906051)6D 906 051 A (6D906051A)6D 906 051 C (6D906051C)6H 906 051 (6H906051)6H 906 051 A (6H906051A)VAG036 906 051 B (036906051B)03C 906 051 D (03C906051D)03C 906 051 G (03C906051G)06D 906 051 (06D906051)06D 906 051 A (06D906051A)06D 906 051 C (06D906051C)06H 906 051 (06H906051)06H 906 051 A (06H906051A)06J 906 051 C (06J906051C)36 906 051 B (36906051B)3C 906 051 D (3C906051D)6D 906 051 (6D906051)6D 906 051 A (6D906051A)6H 906 051 A (6H906051A)6J 906 051 C (6J906051C)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač plnicího tlaku Original VEMO Quality VEM V10-72-0918-1

    zvětšitSnímač barometrického tlaku vzduchu VEMO ‐ VEM V10-72-0918-1
    509,-
    ve skladu
    Barva: ČernáPočet pólů: 4Barva: černáVolitelné Hmotnost [kg]: 0,05EAN:040460017986274046001798627Nahrazuje: V10-72-0918
    AUDI06B 906 051 (06B906051)6B 906 051 (6B906051)SEAT06B 906 051 (06B906051)6B 906 051 (6B906051)ŠKODA06B 906 051 (06B906051)6B 906 051 (6B906051)VOLKSWAGEN06B 906 051 (06B906051)6B 906 051 (6B906051)VAG06B 906 051 (06B906051)06B 906 051 B (06B906051B)6B 906 051 (6B906051)6B 906 051 B (6B906051B)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač polohy plynového pedálu Original VEMO Quality VEM V10-82-0001

    zvětšitSnímač polohy plynového pedálu VEMO ‐ VEM V10-82-0001
    2 839,-
    ve skladu
    Typ převodovky: Šestistupňová mechanická převodovkaPro PR-číslo: VF0Pro OE číslo: 1K1 721 503 ASTvar zásuvky: oválnýPočet pólů: 6Vybavení vozidla: pro vozidla s manuální převodovkouTyp převodovky: Sekvenční manuální převodovkaMateriál: PlastDoplňkový výrobek / doplňkové info 2: se senzoremHmotnost [kg]: 0,318EAN:040460016955824046001695582AUDI1K1 721 503 AA (1K1721503AA)1K1 721 503 AB (1K1721503AB)1K1 721 503 AK (1K1721503AK)1K1 721 503 AL (1K1721503AL)1K1 721 503 AS (1K1721503AS)1K1 721 503 BA (1K1721503BA)1K1 721 503 F (1K1721503F)1K1 721 503 L (1K1721503L)1K1 721 503 P (1K1721503P)1K1 721 503 T (1K1721503T)1K1 723 503 AC (1K1723503AC)1K1 723 503 AL (1K1723503AL)1K1 723 503 AS (1K1723503AS)1K1 723 503 AT (1K1723503AT)1K1 723 503 BA (1K1723503BA)1K1 723 503 M (1K1723503M)1K1 723 503 P (1K1723503P)1K1 723 503 R (1K1723503R)1Q1 721 503 (1Q1721503)1Q1 721 503 A (1Q1721503A)1Q1 721 503 AK (1Q1721503AK)SEAT1K1 721 503 AA (1K1721503AA)1K1 721 503 AB (1K1721503AB)1K1 721 503 AK (1K1721503AK)1K1 721 503 AL (1K1721503AL)1K1 721 503 AS (1K1721503AS)1K1 721 503 BA (1K1721503BA)1K1 721 503 F (1K1721503F)1K1 721 503 L (1K1721503L)1K1 721 503 P (1K1721503P)1K1 721 503 T (1K1721503T)1K1 723 503 AC (1K1723503AC)1K1 723 503 AL (1K1723503AL)1K1 723 503 AS (1K1723503AS)1K1 723 503 AT (1K1723503AT)1K1 723 503 BA (1K1723503BA)1K1 723 503 M (1K1723503M)1K1 723 503 P (1K1723503P)1K1 723 503 R (1K1723503R)1Q1 721 503 (1Q1721503)1Q1 721 503 A (1Q1721503A)1Q1 721 503 AK (1Q1721503AK)ŠKODA1K1 721 503 AA (1K1721503AA)1K1 721 503 AB (1K1721503AB)1K1 721 503 AK (1K1721503AK)1K1 721 503 AL (1K1721503AL)1K1 721 503 AS (1K1721503AS)1K1 721 503 BA (1K1721503BA)1K1 721 503 F (1K1721503F)1K1 721 503 L (1K1721503L)1K1 721 503 P (1K1721503P)1K1 721 503 T (1K1721503T)1K1 723 503 AC (1K1723503AC)1K1 723 503 AL (1K1723503AL)1K1 723 503 AS (1K1723503AS)1K1 723 503 AT (1K1723503AT)1K1 723 503 BA (1K1723503BA)1K1 723 503 M (1K1723503M)1K1 723 503 P (1K1723503P)1K1 723 503 R (1K1723503R)1Q1 721 503 (1Q1721503)1Q1 721 503 A (1Q1721503A)1Q1 721 503 AK (1Q1721503AK)VOLKSWAGEN1K1 721 503 AA (1K1721503AA)1K1 721 503 AB (1K1721503AB)1K1 721 503 AK (1K1721503AK)1K1 721 503 AL (1K1721503AL)1K1 721 503 AS (1K1721503AS)1K1 721 503 BA (1K1721503BA)1K1 721 503 F (1K1721503F)1K1 721 503 L (1K1721503L)1K1 721 503 P (1K1721503P)1K1 721 503 T (1K1721503T)1K1 723 503 AC (1K1723503AC)1K1 723 503 AL (1K1723503AL)1K1 723 503 AS (1K1723503AS)1K1 723 503 AT (1K1723503AT)1K1 723 503 BA (1K1723503BA)1K1 723 503 M (1K1723503M)1K1 723 503 P (1K1723503P)1K1 723 503 R (1K1723503R)1K1721503BA1Q1 721 503 (1Q1721503)1Q1 721 503 A (1Q1721503A)1Q1 721 503 AK (1Q1721503AK)VAG1K1 723 503 AS (1K1723503AS)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač rychlosti VEM V10-72-0995

    zvětšitSnímač rychlosti VEMO ‐ VEM V10-72-0995
    599,-
    ve skladu
    Typ převodovky: 4-stupňová automatická převodovkaKonstrukční rok do: 06/2003Nutně respektovat technické údaje Délka [mm]: 385Počet pólů: 3Hmotnost [kg]: 0,0357EAN:040460013197544046001319754AUDI01M 927 321 B (01M927321B)1M 927 321 B (1M927321B)SEAT01M 927 321 B (01M927321B)1M 927 321 B (1M927321B)ŠKODA01M 927 321 B (01M927321B)1M 927 321 B (1M927321B)VOLKSWAGEN01M 927 321 B (01M927321B)1M 927 321 B (1M927321B)VAG01M 927 321 B (01M927321B)1M 927 321 B (1M927321B)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač stavu motorového oleje Q+, original equipment manufacturer quality MADE IN GERMANY VEM V10-72-1097

    zvětšitSnímač stavu motorového oleje VEMO ‐ VEM V10-72-1097
    1 289,-
    ve skladu
    Počet koncovek: 3Provedení zásuvky: Plochý kolíkTvar zásuvky: oválnýHmotnost [kg]: 0,1EAN:040460013692164046001369216Nahrazuje: V10-72-1097-1
    AUDI1J0 907 660 C (1J0907660C)1J0 907 660 F (1J0907660F)PORSCHE948 606 140 00 (94860614000)95860616030SEAT1J0 907 660 C (1J0907660C)1J0 907 660 F (1J0907660F)ŠKODA1J0 907 660 C (1J0907660C)1J0 907 660 F (1J0907660F)VOLKSWAGEN1J0 907 660 C (1J0907660C)1J0 907 660 F (1J0907660F)1J0907660FVAG1J0 907 660 C (1J0907660C)1J0 907 660 F (1J0907660F)1J0907660FKonkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač teploty interiéru VEM V10-72-0949

    zvětšitSnímač teploty interiéru VEMO ‐ VEM V10-72-0949
    279,-
    ve skladu
    Vybavení vozidla: pro vozidla s klimatizací (manuální)Průměr [mm]: 25Výška [mm]: 52Počet koncovek: 2Hmotnost [kg]: 0,08EAN:040460013312204046001331220AUDI1J0 907 543 (1J0907543)1J0 907 543 B (1J0907543B)1K0 907 543 A (1K0907543A)1K0 907 543 G (1K0907543G)99657392500SEAT1J0 907 543 (1J0907543)1J0 907 543 B (1J0907543B)1K0 907 543 A (1K0907543A)1K0 907 543 G (1K0907543G)ŠKODA1J0 907 543 (1J0907543)1J0 907 543 B (1J0907543B)1K0 907 543 A (1K0907543A)1K0 907 543 G (1K0907543G)VOLKSWAGEN1J0 907 543 (1J0907543)1J0 907 543 B (1J0907543B)1K0 907 543 A (1K0907543A)1K0 907 543 G (1K0907543G)1K0907543GVAG1J0 907 543 (1J0907543)1J0 907 543 B (1J0907543B)1K0 907 543 A (1K0907543A)1K0 907 543 G (1K0907543G)1K0907543GBAJAJ REat10662Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
sbalit vše nahoru
Vše o nákupu
Zákaznický účet
Technický rádce
O společnosti

Logo Heuréka

Tento e-shop měl za posledních 90 dní tisíce spokojených zákazníků.


Logo Zboží.cz

Zde prezentovaná data, zejména celá databáze, nesmějí být kopírována. Je zakázáno data nebo celou databázi bez předchozího písemného svolení od společnosti TecAlliance kopírovat a distribuovat a/nebo toto jednání umožnit třetím osobám. Porušení zakládá neoprávněný zásah do autorského práva a bude stíháno.

Copyright © 2002 - 2026 Autokšeft, s.r.o.
 

Tento web využívá k některým funkcím, jako je přihlašování, analýza návštěvnosti nebo personalizece reklam, soubory cookie. Také dovolujeme našim důvěryhodným partnerům analyzovat využívání našich stránek.