... e-shop s autodíly!

Snímače a čidla AUDI A3 (8L1) 1.9 TDI quattro 96kW

Autodíly a náhradní díly AUDIAutodíly a náhradní díly AUDI A3 (8L1)Elektroinstalace AUDI A3 (8L1)Kategorie elektroinstalace v sobě skrývá mnoho velmi důležitých komponent vozu, které zajišťují veškeré ovládání a signalizaci vozu. Jsou to především startéry, alternátory, svíčky, relé, baterie, spínače, klaksony, kontrolky, čidla, blikače a další.

Vyberte výrobce......

Vyberte výrobce...

seřadit abecedně|od nejlevnějších|od nejdražších

  • VEMO ‐ Opravná sada kabelů, senzor tlaku výfukového potrubí Q+, original equipment manufacturer quality MADE IN GERMANY VEM V10-83-0126

    zvětšitOpravná sada kabelů, senzor tlaku výfukového potrubí VEMO ‐ VEM V10-83-0126
    409,-
    ve skladu
    Omezení výrobce: FORD VAGDélka kabelu [mm]: 200Doplňkový vyrobek / doplňkové info: mit Steckhülsengehäuse s těsněnímPočet pólů: 4Doplňkový výrobek / doplňkové info 2: s řízenímšíře zásuvky [mm]: 1,5Provedení krytky zásuvky: Kryt zásuv.pouzdraPovrch kontaktu: pozlacenoOd rozsahu teploty [°C]: 25Rozsah teploty do [°C]: 140Příčný řez kabelu [mm2]: 0,75Materiál izolace vedení: SilikonEAN:040623752568844062375256884AUDI03G906051MFORD0 261 230 073 (0261230073)0 281 002 976 (0281002976)11 136 735 (11136735)2 085 160 (2085160)736 4107 093 00 (736410709300)VOLKSWAGEN03G906051M1J0 973 704 kit (1J0973704kit)VAG038 906 051 D (038906051D)03G 906 051 E (03G906051E)1J0 973 704 (1J0973704)1J0 973 704 kit (1J0973704kit)Konkurenční kódy 
    Všeobecné informace: In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
    Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.

  • VEMO ‐ Parkovací senzor VEM V10-72-0811

    zvětšitParkovací senzor VEMO ‐ VEM V10-72-0811
    639,-
    ve skladu
    Montovaná strana: oboustrannáBarva: ČernáMontovaná strana: přednízadníKvantita: 4Barva: černáTvar: zahnutý do úhluTyp snímače: ultrazvukový senzorPočet pólů: 3Chemická vlastnost: vhodný pro další nátěrDoplňkový potřebný díl - viz. seznam příslušenství číslo výrobku doporučeného příslušenství: V99-72-0002EAN:040460015474164046001547416AUDI4B0 919 275 (4B0919275)4B0 919 275 A (4B0919275A)4B0 919 275 A GRU (4B0919275AGRU)SEAT4B0 919 275 (4B0919275)4B0 919 275 A (4B0919275A)4B0 919 275 A GRU (4B0919275AGRU)ŠKODA4B0 919 275 (4B0919275)4B0 919 275 A (4B0919275A)4B0 919 275 A GRU (4B0919275AGRU)VOLKSWAGEN4B0 919 275 (4B0919275)4B0 919 275 A (4B0919275A)4B0 919 275 A GRU (4B0919275AGRU)4B0919275A GRU (4B0919275AGRU)VAG4B0 919 275 (4B0919275)4B0 919 275 A (4B0919275A)4B0 919 275 A GRU (4B0919275AGRU)4B0919275A GRU (4B0919275AGRU)BAJAJ REat10020Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Senzor otáček automatické převodovky VEM V10-72-0987

    zvětšitGenerátor impulsů klikový hřídel VEMO ‐ VEM V10-72-0987
    349,-
    ve skladu
    Typ převodovky: automatická převodovkaPočet převodů: 4 rychlostníTyp převodovky: 4-stupňová automatická převodovkaPočet pólů: 3Doplňkový výrobek / doplňkové info 2: s těsnicím kroužkem s kabelemTvar zásuvky: zakřivenýHmotnost [kg]: 0,083EAN:040460013195874046001319587AUDI01M 927 321 (01M927321)1M 927 321 (1M927321)SEAT01M 927 321 (01M927321)1M 927 321 (1M927321)ŠKODA01M 927 321 (01M927321)1M 927 321 (1M927321)VOLKSWAGEN01M 927 321 (01M927321)1M 927 321 (1M927321)VAG01M 927 321 (01M927321)1M 927 321 (1M927321)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Senzor podélného / příčného řízení Original VEMO Quality VEM V10-72-1614

    zvětšitSenzor podélného / příčného řízení VEMO ‐ VEM V10-72-1614
    23 769,-
    ve skladu
    Číslo podvozku (VIN) do: 8L-2-060 000 8L-21016 000Počet pólů: 3Tvar: Forma se liší od origináluEAN:4062375237128VOLKSWAGEN1J0 907 657 A (1J0907657A)1J0 907 657 B (1J0907657B)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Senzor stavu vody v ostřikovačích VEM V10-72-1113

    zvětšitSenzor stavu vody v ostřikovačích VEMO ‐ VEM V10-72-1113
    83,-
    u výrobce
    Hmotnost [kg]: 0,013EAN:040460014227754046001422775AUDI7M0 919 376 (7M0919376)PORSCHE955 628 105 00 (95562810500)SEAT7M0 919 376 (7M0919376)ŠKODA7M0 919 376 (7M0919376)VOLKSWAGEN7M0 919 376 (7M0919376)VAG7M0 919 376 (7M0919376)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Senzor teploty chladicí kapaliny VEM V10-72-0955

    zvětšitSenzor teploty chladicí kapaliny VEMO ‐ VEM V10-72-0955
    189,-
    ve skladu
    Doplňkový vyrobek / doplňkové info: s těsněnímPro OE číslo: 059 919 501 AOznačení barvy: zelenáTvar pružiny: Zádržná pružinaPočet pólů: 4Hmotnost [kg]: 0,027EAN:040460013013844046001301384AUDI059 919 501 A kit (059919501Akit)059 919 501 A S1 (059919501AS1)078 919 501 C kit (078919501Ckit)078919501CS159 919 501 A kit (59919501Akit)59 919 501 A S1 (59919501AS1)78 919 501 C kit (78919501Ckit)78919501CFORD1 100 619 kit (1100619kit)1 124 770 kit (1124770kit)1100619S11124770S1XM21 8A570 BA kit (XM218A570BAkit)XM218A570AAXM218A570AA kit (XM218A570AAkit)SEAT059 919 501 A kit (059919501Akit)059 919 501 A S1 (059919501AS1)059919501A078 919 501 C kit (078919501Ckit)59 919 501 A kit (59919501Akit)59 919 501 A S1 (59919501AS1)78 919 501 C kit (78919501Ckit)ŠKODA059 919 501 A kit (059919501Akit)059 919 501 A S1 (059919501AS1)078 919 501 C kit (078919501Ckit)078919501C59 919 501 A kit (59919501Akit)59 919 501 A S1 (59919501AS1)59919501A78 919 501 C kit (78919501Ckit)78919501CVOLKSWAGEN059 919 501 A kit (059919501Akit)059 919 501 A S1 (059919501AS1)078 919 501 C kit (078919501Ckit)078919501CS159 919 501 A kit (59919501Akit)59 919 501 A S1 (59919501AS1)59919501A78 919 501 C kit (78919501Ckit)78919501CVAG059 919 501 A kit (059919501Akit)059519501A059919501A078 919 501 C kit (078919501Ckit)078919501C59 919 501 A kit (59919501Akit)59519501A78 919 501 C kit (78919501Ckit)FORD USAXM218A570AAXM218A570AAS1XM218A570BABAJAJ REat10064Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Senzor teploty chladicí kapaliny VEM V10-99-0907

    zvětšitSenzor teploty chladicí kapaliny VEMO ‐ VEM V10-99-0907
    239,-
    ve skladu
    Průměr [mm]: 25Délka [mm]: 50Doplňkový vyrobek / doplňkové info: s těsněnímPro OE číslo: 059 919 501Tvar pružiny: Zádržná pružinaPočet pólů: 4Tvar zásuvky: zakřivenýHmotnost [kg]: 0,2EAN:040460012857214046001285721AUDI059 919 501 (059919501)078 919 501 B (078919501B)4A0 919 501 A (4A0919501A)59 919 501 (59919501)78 919 501 B (78919501B)SEAT059 919 501 (059919501)078 919 501 B (078919501B)4A0 919 501 A (4A0919501A)59 919 501 (59919501)78 919 501 B (78919501B)ŠKODA059 919 501 (059919501)078 919 501 B (078919501B)4A0 919 501 A (4A0919501A)59 919 501 (59919501)78 919 501 B (78919501B)VOLKSWAGEN059 919 501 (059919501)078 919 501 B (078919501B)4A0 919 501 A (4A0919501A)59 919 501 (59919501)599 195 01 (59919501)78 919 501 B (78919501B)VAG059 919 501 (059919501)059 919 501 B (059919501B)078 919 501 (078919501)078 919 501 B (078919501B)4A0 919 501 A (4A0919501A)59 919 501 (59919501)59 919 501 B (59919501B)78 919 501 (78919501)78 919 501 B (78919501B)STANDARD AUTOMOBILE55147CUPRA059919501078919501B78919501BKonkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Senzor, regulace sklonu světlometu Green Mobility Parts VEM V10-72-0807

    zvětšitSenzor, regulace sklonu světlometu VEMO ‐ VEM V10-72-0807
    1 899,-
    ve skladu
    Montovaná strana: vpředu a vzadučíslo podvozku: 8L-1-000 001Vybavení vozidla: pro vozidla s regulací sklonu světlometů (automatickou)Počet pólů: 6Tvar zásuvky: tvar DBarva zásuvky: černáPro OE číslo: 4B0 907 503 AHmotnost [kg]: 0,088EAN:040460015428174046001542817AUDI4B0 907 503 (4B0907503)4B0 907 503 A (4B0907503A)SEAT4B0 907 503 (4B0907503)4B0 907 503 A (4B0907503A)ŠKODA4B0 907 503 (4B0907503)4B0 907 503 A (4B0907503A)VOLKSWAGEN4B0 907 503 (4B0907503)4B0 907 503 A (4B0907503A)VAG4B0 907 503 (4B0907503)4B0 907 503 A (4B0907503A)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač - venkovní teplota VEM V10-72-0956

    zvětšitSnímač venkovní teploty VEMO ‐ VEM V10-72-0956
    239,-
    ve skladu
    Počet koncovek: 2Hmotnost [kg]: 0,005EAN:040460012728444046001272844AUDI1J0 919 379 A (1J0919379A)SEAT1J0 919 379 A (1J0919379A)ŠKODA1J0 919 379 A (1J0919379A)VOLKSWAGEN1J0 919 379 A (1J0919379A)VAG1J0 919 379 A (1J0919379A)VW/SEAT1J0919379AKonkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač množství protékajícího vzduchu Green Mobility Parts VEM V10-72-1025-1

    zvětšitSnímač množství protékajícího vzduchu VEMO ‐ VEM V10-72-1025-1
    2 009,-
    ve skladu
    číslo motoru: 15351číslo podvozku: 8L-2-105 001Pro číslo výrobku: V10-72-0959 V10-72-0958Typ karosérie: bez krytuPočet pólů: 5Nový díl Zpětné vracení starého dílu není vyžadováno Doporučené rozšíření opravy: Vzduchový filtrVolitelné Hmotnost [kg]: 0,09EAN:040460017534734046001753473AUDI028 906 461 (028906461)028 906 461 X (028906461X)038906461C06A 906 461 (06A906461)28 906 461 (28906461)28906461X6A 906 461 (6A906461)FORD1 051 396 (1051396)95VW 12B529 BB (95VW12B529BB)SEAT028 906 461 (028906461)028 906 461 X (028906461X)06A 906 461 (06A906461)28 906 461 (28906461)28906461X6A 906 461 (6A906461)ŠKODA028 906 461 (028906461)028 906 461 X (028906461X)06A 906 461 (06A906461)28 906 461 (28906461)28906461X6A 906 461 (6A906461)VOLKSWAGEN028 906 461 (028906461)028 906 461 part (028906461part)028 906 461 X (028906461X)038906461C06A 906 461 (06A906461)28 906 461 (28906461)28906461X6A 906 461 (6A906461)VAG028 906 461 (028906461)028 906 461 part (028906461part)028 906 461 X (028906461X)06A 906 461 (06A906461)28 906 461 (28906461)28 906 461 part (28906461part)28 906 461 X (28906461X)6A 906 461 (6A906461)HITACHI138350138950Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
sbalit vše nahoru
Vše o nákupu
Zákaznický účet
Technický rádce
O společnosti

Logo Heuréka

Tento e-shop měl za posledních 90 dní tisíce spokojených zákazníků.


Logo Zboží.cz

Zde prezentovaná data, zejména celá databáze, nesmějí být kopírována. Je zakázáno data nebo celou databázi bez předchozího písemného svolení od společnosti TecAlliance kopírovat a distribuovat a/nebo toto jednání umožnit třetím osobám. Porušení zakládá neoprávněný zásah do autorského práva a bude stíháno.

Copyright © 2002 - 2026 Autokšeft, s.r.o.
 

Tento web využívá k některým funkcím, jako je přihlašování, analýza návštěvnosti nebo personalizece reklam, soubory cookie. Také dovolujeme našim důvěryhodným partnerům analyzovat využívání našich stránek.