... e-shop s autodíly!

Snímače a čidla AUDI A3 Limousine (8VS, 8VM) 2.0 TDI quattro 110kW

Autodíly a náhradní díly AUDIAutodíly a náhradní díly AUDI A3 Limousine (8VS, 8VM)Elektroinstalace AUDI A3 Limousine (8VS, 8VM)Kategorie elektroinstalace v sobě skrývá mnoho velmi důležitých komponent vozu, které zajišťují veškeré ovládání a signalizaci vozu. Jsou to především startéry, alternátory, svíčky, relé, baterie, spínače, klaksony, kontrolky, čidla, blikače a další.

Vyberte výrobce......

Vyberte výrobce...

seřadit abecedně|od nejlevnějších|od nejdražších

  • VEMO ‐ Lambda sonda Green Mobility Parts VEM V25-76-0028

    zvětšitLambda sonda VEMO ‐ VEM V25-76-0028
    1 889,-ve skladu
    Montovaná strana: před katalyzátorpředníKód motoru: CRBCKvantita: 1Lamdasonda: regulační sondaKód motoru: CRLBKonstrukční rok do: 05/2015Montovaná strana: předníKvantita: 1Lamdasonda: regulační sondaMontovaná strana: před katalyzátorDélka [mm]: 570Počet pólů: 5Tvar zásuvky: tvar DLamdasonda: Závit, předběžně namazanýProvedení izolace vedení: s izolací ze silikonem potaženého vláknitého pletivaEAN:040623751653774062375165377FORD1 886 204 (1886204)DY1328F1FA9Y460CAF1FZ9F472AKonkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Parkovací senzor Green Mobility Parts VEM V20-72-0122

    zvětšitParkovací senzor VEMO ‐ VEM V20-72-0122
    1 229,-ve skladu
    Montovaná strana: vnitřníBarva: ČernáMontovaná strana: přednízadníčíslo podvozku: 8V-D-000 001Barva: černáTyp snímače: ultrazvukový senzorPočet koncovek: 3Chemická vlastnost: lakovatelnéBarva krytu: černáDoplňkový potřebný díl - viz. seznam příslušenství Hmotnost [kg]: 0,016EAN:040460018477834046001847783BMW2 409 650 (2409650)66 20 2 409 650 (66202409650)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Parkovací senzor Original VEMO Quality VEM V10-72-0828

    zvětšitParkovací senzor VEMO ‐ VEM V10-72-0828
    989,-ve skladu
    Barva: ČernáMontovaná strana: vnějšívnitřnízadníPro OE číslo: 5Q0 919 275 B GRUBarva: černáTvar: zahnutý do úhluTyp snímače: ultrazvukový senzorDoplňkový vyrobek / doplňkové info: s těsněnímPovrch: opatřeno základovou barvouPočet pólů: 3Počet koncovek: 3Chemická vlastnost: lakovatelnéBarva krytu: černáHmotnost [kg]: 0,015EAN:040460016416264046001641626AUDI3166409334D919275A5Q0 919 275 B (5Q0919275B)5Q0 919 275 B GRU (5Q0919275BGRU)5Q0 919 275 GRU (5Q0919275GRU)BMW66 20 7 987 047 (66207987047)66 20 9 283 752 (66209283752)66 20 9 283 754 (66209283754)66 20 9 283 764 (66209283764)66 20 9 336 916 (66209336916)6620798704766209283752662092837546620928376466209336916MERCEDES-BENZ90555049059300PORSCHE5Q0919275BGRUSEAT5Q0 919 275 B (5Q0919275B)5Q0 919 275 B GRU (5Q0919275BGRU)5Q0 919 275 GRU (5Q0919275GRU)ŠKODA5Q0 919 275 B (5Q0919275B)5Q0 919 275 B GRU (5Q0919275BGRU)5Q0 919 275 GRU (5Q0919275GRU)TOYOTA89341F4010C089341F4020A189341F4020B189341F4020B289341F4020D089341F4020G089341F4020J0VOLVO31400992VOLKSWAGEN34D919275 GRU (34D919275GRU)34D919275A GRU (34D919275AGRU)5Q0 919 275 B (5Q0919275B)5Q0 919 275 B GRU (5Q0919275BGRU)5Q0 919 275 GRU (5Q0919275GRU)5Q09192755Q0919275B GRU (5Q0919275BGRU)VAG5Q0 919 275 (5Q0919275)5Q0 919 275 B (5Q0919275B)5Q0 919 275 B GRU (5Q0919275BGRU)5Q0 919 275 GRU (5Q0919275GRU)5Q0919275B GRU (5Q0919275BGRU)BAJAJ REat10587Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Senzor stavu vody v ostřikovačích VEM V10-72-1113

    zvětšitSenzor stavu vody v ostřikovačích VEMO ‐ VEM V10-72-1113
    52,-ve skladu
    Hmotnost [kg]: 0,013EAN:040460014227754046001422775AUDI7M0 919 376 (7M0919376)PORSCHE955 628 105 00 (95562810500)SEAT7M0 919 376 (7M0919376)ŠKODA7M0 919 376 (7M0919376)VOLKSWAGEN7M0 919 376 (7M0919376)VAG7M0 919 376 (7M0919376)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Senzor teploty chladicí kapaliny Original VEMO Quality VEM V10-72-0022

    zvětšitSenzor teploty chladicí kapaliny VEMO ‐ VEM V10-72-0022
    979,-ve skladu
    Kód motoru: CRBC CRLBHmotnost [kg]: 0,014EAN:040460016860474046001686047AUDI04E 919 501 B (04E919501B)04L 919 501 (04L919501)4E919501BSEAT04E 919 501 B (04E919501B)04L 919 501 (04L919501)4E919501BŠKODA04E 919 501 B (04E919501B)04L 919 501 (04L919501)4E919501BVOLKSWAGEN04E 919 501 B (04E919501B)04L 919 501 (04L919501)04L9195014E919501BVAG04E 919 501 A (04E919501A)04E 919 501 B (04E919501B)04L9195014E 919 501 A (4E919501A)4E 919 501 B (4E919501B)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Senzor tlaku výfukových plynů Green Mobility Parts VEM V10-72-0242

    zvětšitSenzor tlaku výfukových plynů VEMO ‐ VEM V10-72-0242
    1 349,-ve skladu
    Počet pólů: 3Počet koncovek: 1Tvar zásuvky: tvar DPočet upevňovacích otvorů: 1EAN:040623753104944062375310494AUDI03L 145 049 B (03L145049B)2E0 145 049 (2E0145049)2H0 145 049 (2H0145049)2H0 145 049 C (2H0145049C)SEAT03L 145 049 B (03L145049B)2E0 145 049 (2E0145049)2H0 145 049 (2H0145049)2H0 145 049 C (2H0145049C)ŠKODA03L 145 049 B (03L145049B)2E0 145 049 (2E0145049)2H0 145 049 (2H0145049)2H0 145 049 C (2H0145049C)VOLKSWAGEN03L 145 049 B (03L145049B)2E0 145 049 (2E0145049)2H0 145 049 (2H0145049)2H0 145 049 C (2H0145049C)VAG03L 145 049 (03L145049)03L 145 049 A (03L145049A)03L 145 049 B (03L145049B)2E0 145 049 (2E0145049)2H0 145 049 (2H0145049)2H0 145 049 B (2H0145049B)2H0 145 049 C (2H0145049C)Konkurenční kódy 
    Všeobecné informace: In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
    Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.

  • VEMO ‐ Senzor tlaku výfukových plynů Q+, original equipment manufacturer quality VEM V10-72-1293

    zvětšitSenzor tlaku výfukových plynů VEMO ‐ VEM V10-72-1293
    969,-ve skladu
    Výfukový systém: před filtrem pevných částicPro OE číslo: 03L 906 051 BPočet upevňovacích otvorů: 1Počet vedení: 2Tvar zásuvky: tvar DPočet pólů: 3Hmotnost [kg]: 0,029EAN:040460016676714046001667671AUDI03L 906 051 B (03L906051B)03L906051D03N 906 051 B (03N906051B)3L906051B3L906051D3N 906 051 B (3N906051B)PAB906051BPORSCHE95860615111SEAT03L 906 051 B (03L906051B)03L906051D03N 906 051 B (03N906051B)3L906051B3L906051D3N 906 051 B (3N906051B)ŠKODA03L 906 051 B (03L906051B)03L906051D03N 906 051 B (03N906051B)3L906051B3L906051D3N 906 051 B (3N906051B)95860615111VOLKSWAGEN03L 906 051 B (03L906051B)03L 906 051 D (03L906051D)03N 906 051 B (03N906051B)3L906051B3L906051D3N 906 051 B (3N906051B)95860615111VAG03L 906 051 B (03L906051B)03L 906 051 D (03L906051D)03N 906 051 B (03N906051B)3L 906 051 B (3L906051B)BAJAJ REat10780Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Senzor, regulace sklonu světlometu Green Mobility Parts VEM V10-72-0178

    zvětšitSenzor, regulace sklonu světlometu VEMO ‐ VEM V10-72-0178
    2 939,-ve skladu
    Montovaná strana: levá přední nápravaDo modelového roku: 2016Pro PR-číslo: 2H7Pro kombinované PR-číslo: 2H0+8IM+8Q5 2H6+8IM+8Q5Od modelového roku: 2017Pro kombinované PR-číslo: 2H0+8G4 2H0+8Q5 2H6+8G4 2H6+8Q5Podvozek: pro vozidla s elektronickým tlumičem rázůDoplňkový vyrobek / doplňkové info: s držákemVybavení vozidla: pro vozidla s regulací sklonu světlometů (automatickou)Počet pólů: 4Doplňkový výrobek / doplňkové info 2: Se spojovací tyčíPárová čísla výrobku: V10-72-0221Typ snímače: pákový senzorZpůsob montáže: předmontovanýEAN:040623752709964062375270996AUDI5Q0 412 521 C (5Q0412521C)SEAT5Q0 412 521 C (5Q0412521C)ŠKODA5Q0 412 521 C (5Q0412521C)VOLKSWAGEN5Q0 412 521 C (5Q0412521C)VAG5Q0 412 521 C (5Q0412521C)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač počtu otáček kol VEM V10-72-1056

    zvětšitSnímač počtu otáček kol VEMO ‐ VEM V10-72-1056
    449,-ve skladu
    Montovaná strana: pravá zadní nápravaBarva: ČernáVybavení vozidla: pro vozidla bez tempomatuMontovaná strana: pravá zadní nápravaVybavení vozidla: pro vozidla bez systému parkovacího asistentaBrzdná / jízdní dynamika: pro vozidla s ABSJmenovité napětí [V]: 12Výška [mm]: 27,5Barva: černáTyp snímače: Hallův senzor aktivní senzorPočet pólů: 2Doplňkový výrobek / doplňkové info 2: bez kabeluTvar zásuvky: tvar DPočet upevňovacích otvorů: 1Hmotnost [kg]: 0,01EAN:040460013589134046001358913AUDI7H0 927 804 (7H0927804)WHT 003 856 (WHT003856)WHT003856WHT003856DMAN65271200000652712000027H0927804WHT003856PORSCHE7H0927804WHT 003 856 (WHT003856)SEAT7H0 927 804 (7H0927804)WHT 003 856 (WHT003856)ŠKODA1KD 927 804 (1KD927804)7H0 927 804 (7H0927804)WHT 003 856 (WHT003856)VOLKSWAGEN1KD 927 804 (1KD927804)7H0 927 804 (7H0927804)WHT 003 856 (WHT003856)VAG1KD 927 804 (1KD927804)7H0 927 804 (7H0927804)WHT 003 856 (WHT003856)HITACHI131414SKODA (SVW)7H0 927 804 (7H0927804)Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.

  • VEMO ‐ Snímač polohy vačkového hřídele Q+, original equipment manufacturer quality VEM V10-72-1449

    zvětšitSnímač polohy vačkového hřídele VEMO ‐ VEM V10-72-1449
    1 169,-ve skladu
    Barva: ČernáPožadovaný počet kusů: 1Barva: černáPočet pólů: 3Počet koncovek: 3Hmotnost [kg]: 0,015EAN:040460018846344046001884634AUDI04L 907 601 (04L907601)04L 907 601 A (04L907601A)04L907601C05E 907 601 D (05E907601D)4L 907 601 (4L907601)4L 907 601 A (4L907601A)BMW11 51 7 500 597 (11517500597)11517500597MAN04L90760104L907601A6527421000165274210039SEAT04L 907 601 (04L907601)04L 907 601 A (04L907601A)05E 907 601 D (05E907601D)4L 907 601 (4L907601)4L 907 601 A (4L907601A)ŠKODA04L 907 601 (04L907601)04L 907 601 A (04L907601A)05E 907 601 D (05E907601D)4L 907 601 (4L907601)4L 907 601 A (4L907601A)VOLKSWAGEN04L 907 601 (04L907601)04L 907 601 A (04L907601A)04L907601C05E 907 601 D (05E907601D)05E907601D4L 907 601 (4L907601)4L 907 601 A (4L907601A)VAG04L 907 601 (04L907601)04L 907 601 A (04L907601A)04L907601C05E 907 601 D (05E907601D)05E907601D4L 907 601 (4L907601)4L 907 601 A (4L907601A)BENTLEY04L907601ABAJAJ REat10633Konkurenční kódy 
    Všeobecné informace: Products supplied by us are without exception intended for
    the designated use.
    Please note that our products are usually delivered without
    installation instructions.
    Installation may only be carried out by trained specialist
    personnel.
    There is no guarantee for inappropriate, improper or
    unintended use.
    In the warranty, we always make a distinction between wear
    parts and vehicle parts. All wear parts are subject to a
    reduced warranty period and a maximum mileage.
    Brake components such as brake disks, brake pads, etc.
    maximum of 1000 km (break-in period). Therefore, warranty
    claims for brake parts are only reviewed with an
    installation invoice and a record of the wheel hub run-out
    measurement, including photos.
    For brake disks and brake pads, the break-in requirements
    specified by the vehicle manufacturer must be observed.
    When replacing brakes, the chassis components must always be
    checked with regard to clearance and the wheel hub with
    regard to wobble, and the appropriate documentation must be
    produced.
    If the vehicle is no longer in its original condition due to
    tuning work such as wheel accessories and tracking plates,
    the entitlement to make warranty claims is lost due to
    third-party work. The same warranty claims are lost if the
    vehicle is used for motor sports or similar events.
sbalit vše nahoru
Vše o nákupu
Zákaznický účet
Technický rádce
O společnosti

Logo Heuréka

Tento e-shop měl za posledních 90 dní tisíce spokojených zákazníků.


Logo Zboží.cz

Zde prezentovaná data, zejména celá databáze, nesmějí být kopírována. Je zakázáno data nebo celou databázi bez předchozího písemného svolení od společnosti TecAlliance kopírovat a distribuovat a/nebo toto jednání umožnit třetím osobám. Porušení zakládá neoprávněný zásah do autorského práva a bude stíháno.

Copyright © 2002 - 2025 Autokšeft, s.r.o.
 

Tento web využívá k některým funkcím, jako je přihlašování, analýza návštěvnosti nebo personalizece reklam, soubory cookie. Také dovolujeme našim důvěryhodným partnerům analyzovat využívání našich stránek.