... e-shop s autodíly!

HELLA Obrysové světlo HE 2XS011744-161, 2XS 011 744-161

HELLA Obrysové světlo HE 2XS011744-161, 2XS 011 744-161
HELLA Obrysové světlo HE 2XS011744-161, 2XS 011 744-161HELLA Obrysové světlo HE 2XS011744-161, 2XS 011 744-161HELLA Obrysové světlo HE 2XS011744-161, 2XS 011 744-161
Výrobce:HELLA
Kód:HE 2XS011744-161
Cena s DPH:899,-
Doprava:119,- (nad 5 000,- ZDARMA)
Skladem> 4 ks ve skladu
Doručíme:ve čtvrtek 21. 3. 2024
Osobní odběr (po objednání):ve středu 20. 3. 2024

Parametry

Montovaná strana:boční montáž
pravá
Typ světla:LED
Typ povolení:Prověřeno dle ECE
Napětí [V]:12
24
Počet LED diod:4
Počet světelných funkcí:3
Délka kabelu [mm]:150
Funkce světla:s pozičním světlem (LED)
s koncovým světlem (LED)
s bočním obrysovým světlem (LED)
Provedení zásuvky:Plochá dutinka
Typ povolení:ADR/ GGVS-prověřeno
Design světla:LED
Montáž/demontáž musí provést odborný personál!
EAN:04082300405545
4082300405545

Logo HELLA
Rodinný podnik Hella byl založen roku 1899, samotná značka Hella vznikla o několik let později v roce 1908. Na sekundárním trhu patří k největším dodavatelům automobilových komponentů a diagnostiky v Evropě.


Produkt je součástí sady


Čísla OE

DAF091 1701 (0911701)SCANIA2 301 314 (2301314)20 223 584 (20223584)LIEBHERR10872151KÖGEL6503042DOLL7126237AGRIFAC7700223Konkurenční kódy 

Použitá číslaE4 11392
Nahrazeno2XS 340 418-061

Výskyt produktu v kategoriích


Náhrady

  • HELLA ‐ Obrysové světlo HE 2XS011744-011

    zvětšitObrysové světlo HELLA ‐ HE 2XS011744-011
    949,-ve skladu
    Montovaná strana: boční montážleváTyp světla: LEDDoplňkový výrobek / doplňkové info 2: s řízenímDesign světla: LEDTyp povolení: Prověřeno dle ECETyp ochrany (IP-Kód): 6K9KNapětí [V]: 12 24Počet LED diod: 4Počet světelných funkcí: 3Délka kabelu [mm]: 500Funkce světla: s pozičním světlem (LED) s koncovým světlem (LED) s bočním obrysovým světlem (LED)Počet pólů: 2Provedení zástrčky - ID: EasyConnTvar zásuvky: zaoblenýTyp povolení: ADR/ GGVS-prověřenoMontáž/demontáž musí provést odborný personál! EAN:040823003934394082300393439Použitá číslaE4 11392
    DAF2280720SCANIA2 724 577 (2724577)VAN HOOL11323861KRONE515036599SOMMER2801309003Konkurenční kódy 
    technické informaceRegarding single or double function lamps with LEDs without
    flasher function
    In connection with these low powers, which are
    very different from bulb versions, there can be
    problems during operation on various traction vehicles
    because further lighting functions are detected
    by some traction vehicles. This is a vehicle
    comfort function which is not required by legislation and
    does not release drivers from their obligation
    to see for themselves that the lighting equipment
    is working.
    Here, too, faulty diagnoses can be a result of the lower
    power levels involved (instrument panel in the driver cab
    indicates a bulb failure although the function
    is working).
    The functional ability of these light failure checks can
    only be established by the vehicle manufacturer.
    Operation of the light with alternating current or pulsed
    direct current is not permitted!
    The individual light functions may only be operated with a
    vehicle fuse of max. 3A.
    In the case of onboard current limitation with the values
    specified above by the onboard control unit
    an additional fuse for the lamp is not required.
  • HELLA ‐ Obrysové světlo HE 2XS011744-021

    zvětšitObrysové světlo HELLA ‐ HE 2XS011744-021
    949,-ve skladu
    Montovaná strana: boční montážpraváTyp světla: LEDDoplňkový výrobek / doplňkové info 2: s řízenímDesign světla: LEDTyp povolení: Prověřeno dle ECETyp ochrany (IP-Kód): 6K9KNapětí [V]: 12 24Počet LED diod: 4Počet světelných funkcí: 3Délka kabelu [mm]: 500Funkce světla: s pozičním světlem (LED) s koncovým světlem (LED) s bočním obrysovým světlem (LED)Počet pólů: 2Provedení zástrčky - ID: EasyConnTvar zásuvky: zaoblenýTyp povolení: ADR/ GGVS-prověřenoMontáž/demontáž musí provést odborný personál! EAN:040823003934464082300393446Použitá číslaE4 11392
    DAF2172770SCANIA2 724 578 (2724578)VAN HOOL11323860KRONE515036600SOMMER2801309004Konkurenční kódy 
    technické informaceRegarding single or double function lamps with LEDs without
    flasher function
    In connection with these low powers, which are
    very different from bulb versions, there can be
    problems during operation on various traction vehicles
    because further lighting functions are detected
    by some traction vehicles. This is a vehicle
    comfort function which is not required by legislation and
    does not release drivers from their obligation
    to see for themselves that the lighting equipment
    is working.
    Here, too, faulty diagnoses can be a result of the lower
    power levels involved (instrument panel in the driver cab
    indicates a bulb failure although the function
    is working).
    The functional ability of these light failure checks can
    only be established by the vehicle manufacturer.
    Operation of the light with alternating current or pulsed
    direct current is not permitted!
    The individual light functions may only be operated with a
    vehicle fuse of max. 3A.
    In the case of onboard current limitation with the values
    specified above by the onboard control unit
    an additional fuse for the lamp is not required.
  • HELLA ‐ Obrysové světlo HE 2XS011744-031

    zvětšitObrysové světlo HELLA ‐ HE 2XS011744-031
    899,-ve skladu
    Montovaná strana: boční montážleváTyp světla: LEDDoplňkový výrobek / doplňkové info 2: s řízenímDesign světla: LEDTyp povolení: Prověřeno dle ECETyp ochrany (IP-Kód): 6K9KNapětí [V]: 12 24Počet LED diod: 4Počet světelných funkcí: 3Délka kabelu [mm]: 3000Funkce světla: s pozičním světlem (LED) s koncovým světlem (LED) s bočním obrysovým světlem (LED)Počet pólů: 2Provedení zásuvky: Plochá dutinkaTyp povolení: ADR/ GGVS-prověřenoMontáž/demontáž musí provést odborný personál! EAN:040823003934534082300393453Použitá číslaE4 11392
    DAF090 8463 (0908463)SCANIA2 197 718 (2197718)2 773 651 (2773651)TERBERG-BENSCHOP2-EL0003-040 (2EL0003040)PACTON184144Konkurenční kódy 
    technické informaceRegarding single or double function lamps with LEDs without
    flasher function
    In connection with these low powers, which are
    very different from bulb versions, there can be
    problems during operation on various traction vehicles
    because further lighting functions are detected
    by some traction vehicles. This is a vehicle
    comfort function which is not required by legislation and
    does not release drivers from their obligation
    to see for themselves that the lighting equipment
    is working.
    Here, too, faulty diagnoses can be a result of the lower
    power levels involved (instrument panel in the driver cab
    indicates a bulb failure although the function
    is working).
    The functional ability of these light failure checks can
    only be established by the vehicle manufacturer.
    Operation of the light with alternating current or pulsed
    direct current is not permitted!
    The individual light functions may only be operated with a
    vehicle fuse of max. 3A.
    In the case of onboard current limitation with the values
    specified above by the onboard control unit
    an additional fuse for the lamp is not required.
  • HELLA ‐ Obrysové světlo HE 2XS011744-041

    zvětšitObrysové světlo HELLA ‐ HE 2XS011744-041
    899,-ve skladu
    Montovaná strana: boční montážpraváTyp světla: LEDDoplňkový výrobek / doplňkové info 2: s řízenímDesign světla: LEDTyp povolení: Prověřeno dle ECETyp ochrany (IP-Kód): 6K9KNapětí [V]: 12 24Počet LED diod: 4Počet světelných funkcí: 3Délka kabelu [mm]: 3000Funkce světla: s pozičním světlem (LED) s koncovým světlem (LED) s bočním obrysovým světlem (LED)Počet pólů: 2Provedení zásuvky: Plochá dutinkaTyp povolení: ADR/ GGVS-prověřenoMontáž/demontáž musí provést odborný personál! EAN:040823003934604082300393460Použitá číslaE4 11392
    DAF2283916SCANIA2 420 540 (2420540)TERBERG-BENSCHOP2-EL0003-041 (2EL0003041)PACTON184145Konkurenční kódy 
    technické informaceRegarding single or double function lamps with LEDs without
    flasher function
    In connection with these low powers, which are
    very different from bulb versions, there can be
    problems during operation on various traction vehicles
    because further lighting functions are detected
    by some traction vehicles. This is a vehicle
    comfort function which is not required by legislation and
    does not release drivers from their obligation
    to see for themselves that the lighting equipment
    is working.
    Here, too, faulty diagnoses can be a result of the lower
    power levels involved (instrument panel in the driver cab
    indicates a bulb failure although the function
    is working).
    The functional ability of these light failure checks can
    only be established by the vehicle manufacturer.
    Operation of the light with alternating current or pulsed
    direct current is not permitted!
    The individual light functions may only be operated with a
    vehicle fuse of max. 3A.
    In the case of onboard current limitation with the values
    specified above by the onboard control unit
    an additional fuse for the lamp is not required.
  • HELLA ‐ Obrysové světlo HE 2XS011744-051

    zvětšitObrysové světlo HELLA ‐ HE 2XS011744-051
    1 029,-ve skladu
    Montovaná strana: boční montážleváTyp světla: LEDDoplňkový výrobek / doplňkové info 2: s řízenímDesign světla: LEDTyp povolení: Prověřeno dle ECETyp ochrany (IP-Kód): 6K9KNapětí [V]: 12 24Počet LED diod: 4Počet světelných funkcí: 3Délka kabelu [mm]: 2000Funkce světla: s pozičním světlem (LED) s koncovým světlem (LED) s bočním obrysovým světlem (LED)Počet pólů: 2Provedení zásuvky: -AMP+Typ povolení: ADR/ GGVS-prověřenoMontáž/demontáž musí provést odborný personál! EAN:040823003934774082300393477Použitá číslaE4 11392
    LIEBHERR1 087 215 0 (10872150)SCHMITZ CARGOBULL1162840Konkurenční kódy 
    technické informaceRegarding single or double function lamps with LEDs without
    flasher function
    In connection with these low powers, which are
    very different from bulb versions, there can be
    problems during operation on various traction vehicles
    because further lighting functions are detected
    by some traction vehicles. This is a vehicle
    comfort function which is not required by legislation and
    does not release drivers from their obligation
    to see for themselves that the lighting equipment
    is working.
    Here, too, faulty diagnoses can be a result of the lower
    power levels involved (instrument panel in the driver cab
    indicates a bulb failure although the function
    is working).
    The functional ability of these light failure checks can
    only be established by the vehicle manufacturer.
    Operation of the light with alternating current or pulsed
    direct current is not permitted!
    The individual light functions may only be operated with a
    vehicle fuse of max. 3A.
    In the case of onboard current limitation with the values
    specified above by the onboard control unit
    an additional fuse for the lamp is not required.
  • HELLA ‐ Obrysové světlo HE 2XS011744-061

    zvětšitObrysové světlo HELLA ‐ HE 2XS011744-061
    1 079,-ve skladu
    Montovaná strana: boční montážpraváTyp světla: LEDDoplňkový výrobek / doplňkové info 2: s řízenímDesign světla: LEDTyp povolení: Prověřeno dle ECETyp ochrany (IP-Kód): 6K9KNapětí [V]: 12 24Počet LED diod: 4Počet světelných funkcí: 3Délka kabelu [mm]: 2000Funkce světla: s pozičním světlem (LED) s koncovým světlem (LED) s bočním obrysovým světlem (LED)Počet pólů: 2Provedení zásuvky: -AMP+Typ povolení: ADR/ GGVS-prověřenoMontáž/demontáž musí provést odborný personál! EAN:040823003934844082300393484Použitá číslaE4 11392
    LIEBHERR1 087 215 1 (10872151)SCHMITZ CARGOBULL1162842KEMPF105100Konkurenční kódy 
    technické informaceRegarding single or double function lamps with LEDs without
    flasher function
    In connection with these low powers, which are
    very different from bulb versions, there can be
    problems during operation on various traction vehicles
    because further lighting functions are detected
    by some traction vehicles. This is a vehicle
    comfort function which is not required by legislation and
    does not release drivers from their obligation
    to see for themselves that the lighting equipment
    is working.
    Here, too, faulty diagnoses can be a result of the lower
    power levels involved (instrument panel in the driver cab
    indicates a bulb failure although the function
    is working).
    The functional ability of these light failure checks can
    only be established by the vehicle manufacturer.
    Operation of the light with alternating current or pulsed
    direct current is not permitted!
    The individual light functions may only be operated with a
    vehicle fuse of max. 3A.
    In the case of onboard current limitation with the values
    specified above by the onboard control unit
    an additional fuse for the lamp is not required.
  • HELLA ‐ Obrysové světlo HE 2XS011744-071

    zvětšitObrysové světlo HELLA ‐ HE 2XS011744-071
    919,-ve skladu
    Montovaná strana: boční montážleváTyp světla: LEDDesign světla: LEDTyp ochrany (IP-Kód): 6K9KNapětí [V]: 12 24Počet LED diod: 4Počet světelných funkcí: 3Délka kabelu [mm]: 500Funkce světla: s pozičním světlem (LED) s koncovým světlem (LED) s bočním obrysovým světlem (LED)Provedení zástrčky - ID: Quick LinkTyp povolení: ADR/ GGVS-prověřeno Prověřeno dle ECEMontáž/demontáž musí provést odborný personál! EAN:040823003934914082300393491Použitá číslaE4 11392
    Nahrazeno2XS 011 744-657, 2XS 340 418-131, 2XS 340 827-131
    DAF091 1704 (0911704)MAN34.25260-6002 (34252606002)ZF920006643SCANIA2 253 883 (2253883)Konkurenční kódy 
    technické informaceRegarding single or double function lamps with LEDs without
    flasher function
    In connection with these low powers, which are
    very different from bulb versions, there can be
    problems during operation on various traction vehicles
    because further lighting functions are detected
    by some traction vehicles. This is a vehicle
    comfort function which is not required by legislation and
    does not release drivers from their obligation
    to see for themselves that the lighting equipment
    is working.
    Here, too, faulty diagnoses can be a result of the lower
    power levels involved (instrument panel in the driver cab
    indicates a bulb failure although the function
    is working).
    The functional ability of these light failure checks can
    only be established by the vehicle manufacturer.
    Operation of the light with alternating current or pulsed
    direct current is not permitted!
    The individual light functions may only be operated with a
    vehicle fuse of max. 3A.
    In the case of onboard current limitation with the values
    specified above by the onboard control unit
    an additional fuse for the lamp is not required.
  • HELLA ‐ Obrysové světlo HE 2XS011744-081

    zvětšitObrysové světlo HELLA ‐ HE 2XS011744-081
    919,-ve skladu
    Montovaná strana: boční montážpraváTyp světla: LEDDesign světla: LEDTyp ochrany (IP-Kód): 6K9KNapětí [V]: 12 24Počet LED diod: 4Počet světelných funkcí: 3Délka kabelu [mm]: 500Funkce světla: s pozičním světlem (LED) s koncovým světlem (LED) s bočním obrysovým světlem (LED)Provedení zástrčky - ID: Quick LinkTyp povolení: ADR/ GGVS-prověřeno Prověřeno dle ECEMontáž/demontáž musí provést odborný personál! EAN:040823003935074082300393507Použitá číslaE4 11392
    Nahrazeno2XS 340 418-121, 2XS 340 827-121
    DAF091 1703 (0911703)MAN34.25260-6001 (34252606001)SCANIA2 263 675 (2263675)Konkurenční kódy 
    technické informaceRegarding single or double function lamps with LEDs without
    flasher function
    In connection with these low powers, which are
    very different from bulb versions, there can be
    problems during operation on various traction vehicles
    because further lighting functions are detected
    by some traction vehicles. This is a vehicle
    comfort function which is not required by legislation and
    does not release drivers from their obligation
    to see for themselves that the lighting equipment
    is working.
    Here, too, faulty diagnoses can be a result of the lower
    power levels involved (instrument panel in the driver cab
    indicates a bulb failure although the function
    is working).
    The functional ability of these light failure checks can
    only be established by the vehicle manufacturer.
    Operation of the light with alternating current or pulsed
    direct current is not permitted!
    The individual light functions may only be operated with a
    vehicle fuse of max. 3A.
    In the case of onboard current limitation with the values
    specified above by the onboard control unit
    an additional fuse for the lamp is not required.
  • HELLA ‐ Obrysové světlo HE 2XS011768-011

    zvětšitObrysové světlo HELLA ‐ HE 2XS011768-011
    919,-ve skladu
    Montovaná strana: boční montážTyp světla: LEDDesign světla: LEDTyp povolení: Prověřeno dle ECETyp ochrany (IP-Kód): 6K9KNapětí [V]: 24Počet LED diod: 4Počet světelných funkcí: 3Délka kabelu [mm]: 500Funkce světla: s pozičním světlem (LED) s koncovým světlem (LED) s bočním obrysovým světlem (LED)Počet pólů: 2Provedení zástrčky - ID: EasyConn 90Typ povolení: ADR/ GGVS-prověřenoMontáž/demontáž musí provést odborný personál! EAN:040823003935144082300393514Použitá číslaE4 11392
    DAF2283917Konkurenční kódy 
    technické informaceRegarding single or double function lamps with LEDs without
    flasher function
    In connection with these low powers, which are
    very different from bulb versions, there can be
    problems during operation on various traction vehicles
    because further lighting functions are detected
    by some traction vehicles. This is a vehicle
    comfort function which is not required by legislation and
    does not release drivers from their obligation
    to see for themselves that the lighting equipment
    is working.
    Here, too, faulty diagnoses can be a result of the lower
    power levels involved (instrument panel in the driver cab
    indicates a bulb failure although the function
    is working).
    The functional ability of these light failure checks can
    only be established by the vehicle manufacturer.
    Operation of the light with alternating current or pulsed
    direct current is not permitted!
    The individual light functions may only be operated with a
    vehicle fuse of max. 3A.
    In the case of onboard current limitation with the values
    specified above by the onboard control unit
    an additional fuse for the lamp is not required.
  • HELLA ‐ Obrysové světlo HE 2XS011768-021

    zvětšitObrysové světlo HELLA ‐ HE 2XS011768-021
    909,-ve skladu
    Montovaná strana: boční montážlevápraváTyp světla: LEDDoplňkový výrobek / doplňkové info 2: s řízenímDesign světla: LEDTyp povolení: Prověřeno dle ECETyp ochrany (IP-Kód): 6K9KNapětí [V]: 12 24Počet LED diod: 4Počet světelných funkcí: 3Délka kabelu [mm]: 500Funkce světla: s pozičním světlem (LED) s koncovým světlem (LED) s bočním obrysovým světlem (LED)Počet pólů: 2Provedení zástrčky - ID: EasyConnTyp povolení: ADR/ GGVS-prověřenoMontáž/demontáž musí provést odborný personál! EAN:040823003935214082300393521Použitá číslaE4 11392
    Nahrazeno2XS 302 240-051, 2XS 340 447-021
    SCANIA2 197 720 (2197720)NOOTEBOOM5181513SOLARIS94974Konkurenční kódy 
    technické informaceRegarding single or double function lamps with LEDs without
    flasher function
    In connection with these low powers, which are
    very different from bulb versions, there can be
    problems during operation on various traction vehicles
    because further lighting functions are detected
    by some traction vehicles. This is a vehicle
    comfort function which is not required by legislation and
    does not release drivers from their obligation
    to see for themselves that the lighting equipment
    is working.
    Here, too, faulty diagnoses can be a result of the lower
    power levels involved (instrument panel in the driver cab
    indicates a bulb failure although the function
    is working).
    The functional ability of these light failure checks can
    only be established by the vehicle manufacturer.
    Operation of the light with alternating current or pulsed
    direct current is not permitted!
    The individual light functions may only be operated with a
    vehicle fuse of max. 3A.
    In the case of onboard current limitation with the values
    specified above by the onboard control unit
    an additional fuse for the lamp is not required.

Použito ve vozidlech


Logo Heuréka

Tento e-shop měl za posledních 90 dní tisíce spokojených zákazníků.


Logo Zboží.cz

Zde prezentovaná data, zejména celá databáze, nesmějí být kopírována. Je zakázáno data nebo celou databázi bez předchozího písemného svolení od společnosti TecAlliance kopírovat a distribuovat a/nebo toto jednání umožnit třetím osobám. Porušení zakládá neoprávněný zásah do autorského práva a bude stíháno.